The Motor Drives The Rotor To Move At a High Speed Through The
Transmission Shaft, And Generates Centrifugal Force To Shear The
Material From The Narrow Gap Between The Rotor And The Stator At a
High Speed, Forming a Strong Hydraulic Shear And Turbulent Flow, So
That The Material Can Be Centrifuged And Squeezed At The Same Time.
, Under The Coordination Of Comprehensive Forces Such As Grinding,
Collision, Pulverization, Liquid Layer Friction, And Turbulent Flow
Uniformity, It Can Be Fully Dispersed, Homogenized, Emulsified,
Crushed, Refined, Mixed And Other Process Requirements.
The More Layers Of Rotating Stators In The Working Cavity, The
Larger The Shear Plane, And The Smaller The Gap Between The Rotor
And The Stator, The Better The Effect.
The High-Speed Movement And Fast Shearing In The Narrow Gap Can
Make The Immiscible Solid Phase, Liquid Phase, Gas Phase And Other
Media Uniform, Fine, Dispersed And Emulsified In An Instant. After
The Reciprocating Cycle, The Original Product Can Reach a Stable
High-Quality Product
Online Emulsifier
Single-Stage Emulsification Pump And Multi-Pole Emulsification Pump
Are High-Performance Equipment For Dry Continuous Production Or
Recycling Of Fine Materials. In The Cavity Of Narrow Space, There
Are 1-3 Sets Of Multi-Layer Stators And Rotors With Dual
Engagement. The Rotor Is In The Motor. It Rotates At High Speed
Under The Drive, And Generates Strong Axial Suction To Suck The
Material Into The Cavity. The Material Is Dispersed, Sheared And
Emulsified In The Shortest Time, And The Particle Size Distribution
Range Is Also Significantly Narrowed, So That Fine Long-Term Stable
Products Can Be Obtained.
RJMOnline-S
Online Single Stage Emulsification Pump
RJMOnline-M
Online Multistage Emulsion Pump
Features:
1. Large Processing Capacity, Suitable For Industrialized Re-Line
Continuous Production.
2. Narrow Particle Size Distribution And High Uniformity
3. Time Saving, High Efficiency And Energy Saving
4. Low Noise And Stable Operation
5. Eliminate Quality Differences Between Batches Of Production
6. There Is No Dead Angle, 100% Of The Material Is Sheared By
Dispersion
7 With Short-Distance, Low-Lift Conveying Function
8. Simple To Use And Easy To Maintain
9. Can Realize Automatic Control
Designing Process
The Root Of A Good Product Comes From Design
LTPM China Calculates The Main Parameters Of Agitator And
Configuration Specifications Revolutions, Stirring Flow Rate,
Velocity Gradient, Shear Force, Uniform Mixing Time, Gas-Liquid
Mass Transfer Coefficient Kla And Other Main Parameters Through A
Large Number Of Practical And Theoretical Data For 20 Years To
Ensure Stirring. To Achieve The Best Effect Of The Process, The
Configuration Is Not Wasted, And Won The Praise Of Users. On The
Premise Of Achieving The Effect, It Can Save Costs, Improve Energy
Efficiency And Reduce Energy Consumption. The Product Takes A
Number Of Agitator Patents.LTPM China Has A Variety Of Stirring Experimental Equipment. When
The Experimental Conditions Of Some Media Cannot Be Achieved, It
Can Provide Users With A Large Number Of Optimized Designs In
Combination With CFD Fluid Mechanics Simulation Experiments.
Manufacturing and Applications
Product Quality Is a Combination Of Design-Based And
Finishing-Based
After Detailed Calculation Of Strength, Bending Distance, And
Critical Speed, The Shaft Is Rough-Machined, And Then Annealed And
Tempered To Ensure That The Stress Deformation Of The Shaft Is
Minimized After Machining. Do Processing After Solid Solution
Quenching And Tempering. The Hollow Shaft Is First Dynamically
Balanced And Then Finished. The Final Polishing Meets The Surface
Roughness Requirements. The Fully Sealed Design Between The Blade
And The Shaft Of The Sanitary Agitator Is Easy To Clean, Has No
Residue, And Has No Dead Angle. After The Blade Is Processed, The
Dynamic Balance Reaches G6.3 Level. Together With The Shaft
Mounting, a Large Dynamic Balancing Machine Is Used For The Second
Time To Ensure High-Speed Operation Without Vibration.
