Leadtop Pharmaceutical Machinery |
Verified Suppliers
|
|
Composed by: extractor, filter, pump, heater, evaporator,
condenser, cooler, oil separator and project control computer.
After dipping and heating, the liquid of traditional Chinese
medicine will be pumped into the external heater for heating from
the bottom of extracting tank.
The extra pump liquid will enter into heater for heating from the
bottom of the extracting tank to reflow and play its partial mixing
effect. After the extracting liquid is heated by the heater, it
will be evaporated instantly and separated by the separation
concentrator.
The twice steam will enter into the extracting tank, transmitting
the heat to the solvent in the extracting tank, and also playing
mixing effect.
The residual air will enter into the condenser and become solvent,
and after reflux it will enter into the extracting tank. It will
enter into the heater for condensed liquid to carry out heat
exchange and make the temperature of condensed liquid approximate
to the boiling point of solution in the extracting tank.
Then the residual air will enter into condenser. As the solvent has
large reflux quantity, the density of solute will be rapidly
dissolved The extraction and concentration are synchronous with
continuous discharge of concentrated liquid, thus, the process is
greatly reduced and only requires 4~6 hours.
1) 2 in 1 compact design, extraction, concentration/solvent recovery in one machine .
2) Equip with centrifuge pump and vacuum pump, just connect the steam, cooling water and power supply to boot the machine.
3) Equip with Oil-water separator, can collect the volatile oil in the herbs during extraction.
4) Material contact parts adopt SS304/SS316 with fine polishing to the liner, meet GMP requirement.
Hempseed oil
The appearance and characteristics are very close to the low iodine value of linseed oil, but slightly greenish.
The approximate fatty acid composition is: 10.1% saturated acid, 16% oleic acid, 46% linoleic acid, and 28% linolenic acid.
The acid value is 3 mg KOH/g, the iodine value is 149-167, and the relative density is 0.925-0.933 (15/15 ° C). The freezing point is about 16 °C.
The main ingredients are glycerides of linoleic acid, linolenic acid and oleic acid.
Used in industries such as paints and soaps.
Manufacturing Workshop:
(Workshop 1)
(Workshop 2)
(Workshop 3)
Installed Machine ready for shipping:
Production Line sending to Saudi Arab