Herb Extract Machine
Better Industry can supply the ethanol extraction system with
winterization and solvent recovery functions, the capacity in the
range of 100--53,000 lbs biomass per day for each system. We also
can customize the system with wiped film ,centrifuge, 2 micro fine
Our factory was engaged in herb extraction in China for more than
18years . The CBD solution was supplied to the international
customers since 2015. If you are looking for a CBD system with big
capacity, we are the right one to talk with you . Suggest you visit
us face to face ,so many copies by internet, we cant put more
information to share here, hope you understand !
1. The Hemp Oil Ethanol Extractor consists of extractor,
tubular heater, evaporator, condenser, oil-liquid separator, oil
collector, medicine liquid pump, weighing vent, liquid storage
tank, filter, vacuum pump, and electric cabinet. Defoamers are
fixed in the steam outlet of the extractor and evaporator. The
units without steam heating can be fixed with oil heating system.
2. It can be operate to hot recyling distill and condense, normal
extraction, concentration, precipitation and percolation.
3. It can work in the condition of negative pressure, atm. and
positive pressure. It can apply to distill water, ethanol and
solvent, up to GMP standard.
4. The Hemp Oil Ethanol Extractor great advantages in
multi-function, high efficiency, energy saving, and wide operation
arrange. It pioneers in comprehensive capacity in nationwide; it is
the pilot equipment in distilling natural herbal medicine,
especially fit for research institution, universities and collages,
and factory pilot experiment, or distilling valued medicine, or low
temperature fresh herbal. It has been widely used in factories.
How it Works:
- Put the prepared materials into the extracting tank, and add
solvent 5-10 times the volume of the materials ( the actual type
and the amount of solvent is according to the process requirement).
- After soaking for a certain while, open the steam valve to heat
up, normally by jacket heating, steam heating is only for water
extraction and drawing aromatic oil.
- After cooking for a certain while, pump the extraction solution
into the concentrator.
The appearance and characteristics are very close to the low iodine
value of linseed oil, but slightly greenish.
The approximate fatty acid composition is: 10.1% saturated acid,
16% oleic acid, 46% linoleic acid, and 28% linolenic acid.
The acid value is 3 mg KOH/g, the iodine value is 149-167, and the
relative density is 0.925-0.933 (15/15 ° C). The freezing point is
about 16 °C.
The main ingredients are glycerides of linoleic acid, linolenic
acid and oleic acid.
Used in industries such as paints and soaps.
Machine Main Technical Data:
|The volume of extracting (m³)||0.1||0.2||0.3||0.5||1||2||3||4||5||6|
|Raw Material Input Capacity (kg)||10-15||20-30||30-45||50-70||100-150||200-300||300-450||400-600||500-700||600-800|
|Capacity of Concentrating Evaporator||25 kg/hour|
|1250 kg/hour||1500 kg/hour|
|Water Circulation Capacity||10-15T||10-15T||10-15T||10-15T||15-20T||15-20T||15-25T||15-25T||20-30T||20-30T|
|The time of extraction (h)||6-8||6-8||6-8||6-8||8||8||8||8||8||8|
|Concentrate density (%)||1.2-1.35|
|The work temperature of extracting and concentrating (°C)||Water: 50-90°C Alcohol: 40-80°C|
|Power of Vacuum Pump||3kw||4KW||4.5KW||5KW||6.5kw||8KW||9kw||10kw||11kw||12kw|