Active Member
|
[China]
Address: Fenghuang town, Zhangjiagang City,Jiangsu Province,China
Contact name:BONNY WANG
Jiangsu Hualian Yiming Machinery Co.,Ltd. |
|
|
Introduction:
The V type cone mixer adopts manual feed and closed disc valve
discharge, which can avoid dust spilling; with unique mixing barrel
structure, high efficiency blending, and no dead angle,the
materials can mix evenly. The inside and outside of machine are
polished.It is suitable for smaller powder, blocks and the material
that contain a certain mixture of water. In addition, the machine
is also equipped with a timing device; In that case, you can
control the material mixing time.
Application:
The V type mixer blender is widely used for blending more than two
materials(powder or granule shape)in pharmaceutical industry,
chemical industry, foodstuff industry and so on.It is suitable for
mix powder, granule material with good liquidity, small property
difference. Because of the material in the v-shaped mixed container
can flow smoothly, it will not destroy the base material, so the
v-shaped mixer applies to easy to broken, easy wear granular
materials,fine powder,and block materials with certain moisture
content.
V cone mixer blender applied fields
The V type mixer blender is widely used for blending more than two
materials(powder or granule shape)in pharmaceutical industry,
chemical industry, foodstuff industry and so on.It is suitable for
mix powder, granule material with good liquidity, small property
difference. Because of the material in the v-shaped mixed container
can flow smoothly, it will not destroy the base material, so the
v-shaped mixer applies to easy to broken, easy wear granular
materials,fine powder,and block materials with certain moisture
content.
Technical characters:
Main Technical Parameter:
| Model | VHJ-0.18 | VHJ-0.3 | VHJ-0.5 | VHJ-1.0 | VHJ-1.5 | VHJ-2.0 | VHJ-2.5 | VHJ-3.0 | VHJ-4.0 | VHJ-5.0 | VHJ-6.0 |
| Productive capacity(kg/time) | 72 | 120 | 200 | 400 | 600 | 80 | 1000 | 1200 | 1600 | 2000 | 2400 |
| Model of vacuum pump | W2 | W2 | W2 | W3 | W3 | W3 | W3 | W4 | W4 | W4 | W4 |
| Time of raw material fed in(min) | 3-5 | 3-5 | 4-6 | 6-9 | 6-10 | 8-13 | 8-15 | 8-12 | 10-15 | 15-20 | 18-25 |
| Mixing time(min) | 4-8 | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 | 8-12 | 8-12 | 8-12 | 8-12 |
| Total volume(m3) | 0.18 | 0.3 | 0.5 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 |
| Stirring speed(r/min) | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 10 | 10 | 10 | 10 |
| Motor power(kw) | 1.1 | 1.1 | 2.2 | 4 | 4 | 5 | 7.5 | 7.5 | 11 | 15 | 18.5 |
| Rotation height(mm) | 1580 | 1760 | 2400 | 2840 | 3010 | 3240 | 3680 | 3700 | 4350 | 4800 | 5300 |
| Weight (kg) | 280 | 320 | 550 | 950 | 1020 | 1600 | 2040 | 2300 | 2800 | 3250 | 3850 |
