Leadtop Pharmaceutical Machinery |
Product Description:
LTPM CHINA Company's extracting equipment can be used to make all
kinds of liquid, powers from herbs, teas, plant leaves etc.
LTPM CHINA company values are based on the concept of creating a craft-built system for you as its principal mission. Traditional manual craftsmanship is employed in the construction of each system, supported in combination with industrial manufacturing.
LTPM CHINA team of coppersmiths have many years of manufacturing experience with extracting equipment, and have access to technology for even large-scale manufacturing. These coppersmiths skillfully fabricate each extracting system with meticulous and professional coppers mithing quality.
Main Features:
1. The Multifunctional Extraction Tank Herbal Extractor consists of
extractor, tubular heater, evaporator, condenser, oil-liquid
separator, oil collector, medicine liquid pump, weighing vent,
liquid storage tank, filter, vacuum pump, and electric cabinet.
Defoamers are fixed in the steam outlet of the extractor and
evaporator. The units without steam heating can be fixed with oil
heating system.
2. It can be operate to hot recyling distill and condense, normal extraction, concentration, precipitation and percolation.
3. It can work in the condition of negative pressure, atm. and positive pressure. It can apply to distill water, ethanol and solvent, up to GMP standard.
4. The group has great advantages in multi-function, high efficiency, energy saving, and wide operation arrange. It pioneers in comprehensive capacity in nationwide; it is the pilot equipment in distilling natural herbal medicine, especially fit for research institution, universities and collages, and factory pilot experiment, or distilling valued medicine, or low temperature fresh herbal. It has been widely used in factories.
Application:
An extraction device for leaching the polypeptide active substance
in the bones of healthy pigs or fetal calves by steam extraction or
likewise. It is used in medicine, bio-pharmaceutical and health
care products industries, and has the advantages of high efficiency
and convenient operation.
Extraction Tank:
1.Water extraction: | Water and traditional Chinese medicine are put into the extraction
tank, and steam is supplied to the interlayer. After boiling in the
tank, the steam is reduced and kept boiling. If the closed
extraction is required, cooling water is required to cool the
vaporized body and return to the extraction tank to maintain
circulation and temperature. | ||
2. The drug and ethanol are first added to the tank at a certain
ratio, and then the interlayer steam must be sealed, and the
cooling water is turned on to reduce the heating steam when the
tank reaches the required temperature, so that the cooled alcohol
can be refluxed. In order to improve the efficiency, the pump can
be forced to circulate, so that the liquid medicine is pumped out
from the bottom of the tank and returned to the tank at the upper
return port of the tank. The stainless steel extraction tank is
provided with a distributor, so that the reflux liquid can be
uniformly returned to the tank to release the channel flow. | |||
Oil extraction | Add the Chinese medicine containing volatile oil to the extraction
tank, the circulation valve of the oil separator is opened, the
bypass return valve is closed, and the steam valve is opened to
reach the volatilization temperature, and the cooling water is
turned on for cooling, and the cooled liquid should be kept in the
separator. and shall be maintained with certain Liquid level
difference makes it separate |
Main Technical Data:
Manufacturer | China LTPM Group Co., LTD | ||
PN | 5L vacuum emulsifying mixer | ||
Capacity | Design volume: 6L, working capacity:5 L | ||
Kettle Cover | Liquid(particle)inlet, sunk material inlet, air inlet with filter, inspect light and sight glass, vacuum port, pressure meter(1 to -0.1 bar), pressure clamp | ||
Mixing pot |
Material | Inner layer: SUS316L thickness: 3mm | |
Middle layer: SUS304 thickness: 2mm | |||
Outside layer: SUS304 thickness:2mm | |||
configuration | Bottom material exhaust, size: 1.5” | ||
Temp. sensor (0-199℃) | |||
Electrical heating: 2kw, cooling water inlet | |||
Stirring system |
Homogenizer | 1.Material: SUS316L; standard homogenizer 2. Power: 1.1 kw/380/50Hz; RPM: 0--2800R/Min | |
Stirring scrap and middle stirring | Material: SUS316L,Scrap material: PTFE | ||
1. Stirring scrap and middle stirring use the same motor 2,Power:0.75 kw/380V/50Hz;RPM:0~86r/min(Frequency control) 3. Stirring scrap and middle stirring rotating the opposite direction | |||
Safety: 1. During stirring, the cover can not open, 2. Cover lift can not stirring. | |||
Vacuum system | 1. Vacuum pump: water recycle, power 0.37kw/380V/50Hz 2. With pressure sensor (during vacuum condition, hydraulic can not open) | ||
Heating method | Jacket electrical heating | ||
Exhaust method | Electric doom and bottom discharge or positive pressure discharge material | ||
Pressure | Pressure in the pot during working: -0.090 Mpa; Jacket working pressure:0.2 Mpa | ||
Control box | SUS304 , 1.2mm thickness | ||
Dimension | 1400mm×600mm×1900~2400 mm | ||
Shelf is SS, platform with raised platform and SS guardrail | |||
Spare parts | One year spare parts and tools | ||
Guarantee | One year | ||
Using life | More than 15 years |
Oil pot | Design volume | 3.35L |
Working capacity | 2.7L | |
Stirring power | 0.025kw | |
Stirring speed | 1400 RPM | |
Heating power | 1 Kw | |
Water pot | Design volume | 3.35L |
Working capacity | 2.7L | |
Stirring power | 0.025kw | |
Stirring speed | 1400 RPM | |
Heating power | 1 Kw |