Leadtop Pharmaceutical Machinery |
|
Product Description:
High Efficiency Low Temperature Extraction and Concentration Production Line suits for extraction of herbal material, such as rose oil, zedoary turmeric oil, star anise oil, litsea cubeba oil, patchouli oil, peppermint oil, lavender oil. It is easy for operating and with high oil extraction rate. It meets for GMP standard.
Functions:
1.It adopts the steam distillation tank for waterextraction(wet steaming), heated by jacket and steam generator.
2.It can completelyeliminate rust taste, and the color difference technology problems of fragrantessential oil.
3.Please mixing at regular time when the wetsteaming, make the herbal(such as rose and water fully mixed) and improve thefinished oil rate.
4.Make the vapor liquid cooling more rapidlyand thoroughly though the condenser and the cooler.
5.The high precision innersurface makes the oil condensate flow smoothly. Whole body stainless steel, save area andeasy operation.
Main Technical Data:
Manufacturer | China LTPM Group Co., LTD | ||
PN | 5L vacuum emulsifying mixer | ||
Capacity | Design volume: 6L, working capacity:5 L | ||
Kettle Cover | Liquid(particle)inlet, sunk material inlet, air inlet with filter, inspect light and sight glass, vacuum port, pressure meter(1 to -0.1 bar), pressure clamp | ||
Mixing pot |
Material | Inner layer: SUS316L thickness: 3mm | |
Middle layer: SUS304 thickness: 2mm | |||
Outside layer: SUS304 thickness:2mm | |||
configuration | Bottom material exhaust, size: 1.5” | ||
Temp. sensor (0-199℃) | |||
Electrical heating: 2kw, cooling water inlet | |||
Stirring system |
Homogenizer | 1.Material: SUS316L; standard homogenizer 2. Power: 1.1 kw/380/50Hz; RPM: 0--2800R/Min | |
Stirring scrap and middle stirring | Material: SUS316L,Scrap material: PTFE | ||
1. Stirring scrap and middle stirring use the same motor 2,Power:0.75 kw/380V/50Hz;RPM:0~86r/min(Frequency control) 3. Stirring scrap and middle stirring rotating the opposite direction | |||
Safety: 1. During stirring, the cover can not open, 2. Cover lift can not stirring. | |||
Vacuum system | 1. Vacuum pump: water recycle, power 0.37kw/380V/50Hz 2. With pressure sensor (during vacuum condition, hydraulic can not open) | ||
Heating method | Jacket electrical heating | ||
Exhaust method | Electric doom and bottom discharge or positive pressure discharge material | ||
Pressure | Pressure in the pot during working: -0.090 Mpa; Jacket working pressure:0.2 Mpa | ||
Control box | SUS304 , 1.2mm thickness | ||
Dimension | 1400mm×600mm×1900~2400 mm | ||
Shelf is SS, platform with raised platform and SS guardrail | |||
Spare parts | One year spare parts and tools | ||
Guarantee | One year | ||
Using life | More than 15 years |
Oil pot | Design volume | 3.35L |
Working capacity | 2.7L | |
Stirring power | 0.025kw | |
Stirring speed | 1400 RPM | |
Heating power | 1 Kw | |
Water pot | Design volume | 3.35L |
Working capacity | 2.7L | |
Stirring power | 0.025kw | |
Stirring speed | 1400 RPM | |
Heating power | 1 Kw |
Hemp seed oil:
The appearance and characteristics are very close to the low iodine value of linseed oil, but slightly greenish.
The approximate fatty acid composition is: 10.1% saturated acid, 16% oleic acid, 46% linoleic acid, and 28% linolenic acid.
The acid value is 3 mg KOH/g, the iodine value is 149-167, and the relative density is 0.925-0.933 (15/15 ° C). The freezing point is about 16 °C.
The main ingredients are glycerides of linoleic acid, linolenic acid and oleic acid.
Used in industries such as paints and soaps.