Shanghai Xinlei Electronic Technology Co., Ltd. |
|
Product Name: PET/PVC/PC panel switch in china
Electronic
Characteristics: <35V (DC), <100mA, 1W
Flat type: ≥ 500 million times
Tactile type: ≥ 100 million times
Contact resistance: 10Ω--500Ω (according to trace length and
materials to confirm)
Operation temperature: -40°C - + 80°C
Insulating impedance: >100MΩ 250V DC
Stock temperature: -40°C - + 85°C
Resistance of the wire: <1Ω/cm, width: 1.27mm
Humidity: + 40°C, 90%-95%, 240 hours
Operation force: flat type 57-284g (2-10oz), tactile type: 170-397g
(6-14oz)
What Can We Do?
Including but not limited to the following
Technology Capability
1.Material:Polycarbonate/PET/PVC/Rubber/Glass
2.Matt/Glossy Surface
3.With/Without Embossing Metal dome
4.Assembly LED/FFC Cable
5.Clear/Transparent/Color Window
6.Adhesive:3M 467, 468, 9448A etc
7.Connector:1.0mm pitch, 2.54mm pitch
Item | Project | Details |
1 | Product name | PET/PVC/PC panel switch in china |
2 | Function | Zero rturn rate, waterproof |
3 | Rigidity | Soft |
4 | tail tape | Normal |
5 | Life expectancy | Flat type: 500 million times |
6 | Life expectancy | Tactile type: 100 million times |
7 | Operating voltage | 0-35V DC |
8 | LED | According to designing |
This panel is our sample picture. If you need to custom the panel you designed, please provide the following information
1. Required files: CAD, CDR, AI, Corel Draw, etc. (preferably CDR and AI, with color)
2. Size: Size of panel and cable
3. Color: Pantone color card
4. Buttons: number, emboss or not, metal dome or not
5. LED: number, color, type
6. Window: clear window or transparent window
7. Surface treatment: glassy or matte
8. Connector type: flat cable (Please specify the type you need)
This below is a metal dome tactile membrane switch with Aluminum
plate.
1.Overlay Materials: The most commonly used base materials are
polyester(PET) and polycarbonate(PC).
2.Rear Adhesive: 3M467MP, 3M468MP,etc.
3.Matching color: Pantone and RAL color matching system.
4.Gloss, semi-gloss or matte
5.Non-tactile
6.Standard Tolerances: +/- 0.10inch(+/-0.25mm)