2-6 Inches TPU PVC Lay Flat Pvc Pipe Manufacturing Plant For Water / Gas Transportation

2-6 Inches TPU PVC lay flat Plastic Pipe Making Machine for water and gas transportation

Application

This machine is special to make the TPU PVC layflat hose with TPU PVC resin and fiber. It can make the smooth outer and inner layer at one step.This kind of hose is popular used for aggriculture, gas transportation, fire work and industry,etc

with normal pressure 0.39 Mpa vertical tensile intension 35Mpa, horizontal tensile intension 25 MPA, advantages of mo-water-absorbing and aging-resistance and easy-move, the finished tube is used for movable, half-movable agricultural irrigation pipe line and fire fighting pipe line

Introduction:

The line is widely used in agriculture irrigation, project, mining, environment protection tec. This machine adopts European advanced technology but made some improvements by us. It adopts terylene yarn weaven hose as reinforced lay, the terylene yarn weaven hose is inserted into vertical die by leading mould and device, then the hot PVC coated on the out and inner sides of the yarn by high pressure and make into flat hose at once. After cooling, dry, printing and winder, the lay flat hose will form roll as setted length.

The series flexible tubes with a plastic coat we produced have 50 specifications and models.We divide the products into 3 models according to the working pressure , they are 0.2,0.3,0.4,each model can be further devided into 10 specifications according to the inner diameters , they are 25,30,40,50,65,76,100,125,and 200 mm. Other specifications of products also can be produced according to the special demands of users.

Feature:

1.This machine adopts european advanced technology but made some improvements by us.

2.It adopts terylene yarn weaven hose as inserted into vertical die by leading mould and inner sides of the yarn by high pressure and make in to flat hose at once.

3.After cooling, day, printing and winder, the lay flat hose will form roll as setted length.

technical parameters

Full Service
1) Pre-sale service:
To provide market research information and consultation
To provide all kinds of convenience and market service
To help customers make project planning and systematic analysis
To maximize customer's satisfaction
To achieve the mutual benefits of our customers and our company
2) After-sale service:
To install products and test products for customers
To provide the formulas and technologies of relevant products and the information of chemical materials manufactories
To provide technical direction according to customers' requirements
To provide technical training for clients' employees
To be responsible for maintenance service, door-to-door service under necessary circumstance

machine picture