Active Member
|
[China]
Address: Anping county, Hebei province, China
Contact name:
Anping Wannuo Wire Mesh Products Co., Ltd. |
|
|
Attractive Perforated Metal Sheet Stainless Steel Perforated Plate with Oxidation
Description:
The material of perforated sheet is mainly made of metal, iron plate, galvanized plate, stainless steel, aluminum plate are the most commonly used.The pattern of punch net is divided according to the shape of hole, round hole, square hole, long round hole and hexagon are common.In some construction industry, perforated sheet is often used as industry decoration perforated mesh.
In the perforated sheet filed to follow a principle, the aperture should be greater than or equal to the thickness of the sheet metal that is to comply with the minimum aperture principle.The closer the hole diameter is to the thickness of the plate, the more difficult the machining is and the higher the processing fee is.In some materials, the aperture can be smaller than the thickness of the plate.
Hole Shape:
Round hole,Slot hole,Square hole,Hexagonal hole,Plum blossom hole,Scale hole,Cross hole,Triangle hole,etc.
Now let's talk about the arrangement of punch holes:
(1) straight line
(2) 60 ° staggered
(3) 45 ° staggered
(4) square hole
(5) long round hole
(6) long round hole
(7) hexagonal hole
Perforated stainless steel is either T304 stainless steel sheet or T316 stainless steel sheet that has been punched with a series of holes to give you a nominated pattern. The pattern can vary depending on the hole size, distance between holes and the thickness of the material.
Specification:
Material: SS304 Chemical Composition %
| C | Si | Mn | P | S | Ni | Cr |
| 0.07 | 1 | 2 | 0.035 | 0.03 | 8 | 17 |
SS304 Physical Property:
Tensile strength N/qmm | Yield Point N/qmm | Elongation % | Cross Section Area % |
| 520 | 205 | 40 | 60 |
Size:
| Diameter D | Pitch P | Open area | Thickness |
| (mm) | (mm) | % | 1.0mm |
| 1.50 | 3.00 | 23% | ** |
| 2.00 | 4.00 | 23% | ** |
| 2.50 | 5.00 | 23% | ** |
| 3.00 | 6.00 | 23% | ** |
| 4.00 | 8.00 | 23% | ** |
| 5.00 | 10.00 | 23% | ** |
| 6.00 | 10.00 | 33% | ** |
| 7.00 | 10.00 | 44% | ** |
| 8.00 | 15.00 | 26% | ** |
| 10.00 | 15.00 | 40% | ** |
Perforated stainless steel has many various uses, including catering for the architectural, chemical, mining & refining, the uses are endless. The following items are generally available from stock, or with a very short delivery. It you don't see what your looking for, we can custom punch many patterns.
This perforated metal rust and corrosion resistance good, isn't afraid of moisture and water. It can have a long life in a wet environment. The stainless steel perforated metal is very suitable for use in drainage rack, building ceiling.
| DESCRIPTION | HOLE SIZE | PITCH | OPEN AREA | THICKNESS | |||||
| (mm) | (mm) | (%) | 0.4mm | 0.5mm | 0.8mm | 1.0mm | 1.2mm | 1.5mm | |
| RO.8 T2 | 0.80 | 2.00 | 15 | √ | √ | √ | ii | ii | ii |
| R1 T2 | 1.00 | 2.00 | 23 | √ | √ | √ | √ | ii | ii |
| R1.2 T2.25 | 1.20 | 2.25 | 26 | ii | √ | √ | √ | ii | ii |
| R1.2 T2.5 | 1.20 | 2.50 | 21 | ii | √ | √ | √ | ii | ii |
| R1.5 T2.75 | 1.50 | 2.75 | 27 | ii | √ | √ | √ | √ | ii |
| R1.5 T3 | 1.50 | 3.00 | 23 | ii | √ | √ | √ | √ | ii |
| R1.8 T3.5 | 1.80 | 3.50 | 24 | ii | √ | √ | √ | √ | √ |
| R2 T3 | 2.00 | 3.00 | 40 | ii | √ | √ | √ | ii | ii |
| R2 T3.5 | 2.00 | 3.50 | 30 | ii | √ | √ | √ | √ | ii |
| R2 T4 | 2.00 | 4.00 | 23 | ii | √ | √ | √ | √ | √ |
| R2.5 T3.5 | 2.50 | 3.50 | 46 | ii | √ | √ | √ | √ | √ |
| R2.5 T4 | 2.50 | 4.00 | 35 | ii | √ | √ | √ | √ | √ |
| R2.5 T4.5 | 2.50 | 4.50 | 28 | ii | √ | √ | √ | √ | √ |
| R2.5 T5 | 2.50 | 5.00 | 23 | ii | √ | √ | √ | √ | √ |
| R3 T5 | 3.00 | 5.00 | 33 | ii | √ | √ | √ | √ | √ |
| R3 T6 | 3.00 | 6.00 | 23 | ii | √ | √ | √ | √ | √ |
| R3.5 T5 | 3.50 | 5.00 | 44 | ii | √ | √ | √ | √ | √ |
| R4 T5 | 4.00 | 5.00 | 58 | ii | √ | √ | √ | ii | ii |
| R4 T6 | 4.00 | 6.00 | 40 | ii | √ | √ | √ | √ | √ |
| R4 T8 | 4.00 | 8.00 | 23 | ii | √ | √ | √ | √ | √ |
| R5 T7 | 5.00 | 7.00 | 46 | ii | √ | √ | √ | √ | √ |
| R5 T8 | 5.00 | 8.00 | 35 | ii | √ | √ | √ | √ | √ |
| R5 T10 | 5.00 | 10.00 | 23 | ii | √ | √ | √ | √ | √ |
| R5 T25 | 5.00 | 25.00 | 4 | ii | √ | √ | √ | √ | √ |
| R6 T8.5 | 6.00 | 8.50 | 45 | ii | √ | √ | √ | √ | √ |
| R6 T9 | 6.00 | 9.00 | 40 | ii | √ | √ | √ | √ | √ |
| R6 T10 | 6.00 | 10.00 | 33 | ii | √ | √ | √ | √ | √ |
| R7 T10 | 7.00 | 10.00 | 44 | ii | ii | ii | √ | √ | √ |
| R8 T11 | 8.00 | 11.00 | 48 | ii | ii | ii | √ | √ | √ |
| R8 T12 | 8.00 | 12.00 | 40 | ii | ii | ii | √ | √ | √ |
| R8 T15 | 8.00 | 15.00 | 26 | ii | ii | ii | √ | √ | √ |
| R10 T13 | 10.00 | 13.00 | 54 | ii | ii | ii | √ | √ | √ |
| R10 T14 | 10.00 | 14.00 | 46 | ii | ii | ii | √ | √ | √ |
| R10 T15 | 10.00 | 15.00 | 40 | ii | ii | ii | √ | √ | √ |
| R10 T18 | 10.00 | 18.00 | 28 | ii | ii | ii | √ | √ | √ |
| R12 T16 | 12.00 | 16.00 | 51 | ii | ii | ii | √ | √ | √ |
| R12 T17 | 12.00 | 17.00 | 45 | ii | ii | ii | √ | √ | √ |
| R15 T20 | 15.00 | 20.00 | 51 | ii | ii | ii | √ | √ | √ |
| R15 T21 | 15.00 | 21.00 | 46 | ii | ii | ii | √ | √ | √ |
| R20 T25 | 20.00 | 25.00 | 58 | ii | ii | ii | √ | √ | √ |
| R20 T27 | 20.00 | 27.00 | 50 | ii | ii | ii | √ | √ | √ |
| R20 T28 | 20.00 | 28.00 | 46 | ii | ii | ii | √ | √ | √ |
| R20 T30 | 20.00 | 30.00 | 40 | ii | ii | ii | √ | √ | √ |
Note:√ expresses the popular specifications we can do. other specifications can be custom made at request.
Features:
Application:
1. Farm fence, zoo fence.
2. Window screen, filters, barbecue mesh.
3. Sport fence, border fence.
4. Grills, architectural accents.
5. Mining, medicine, grain selection, indoor sound insulation, silencers, ventilation, grain storage and machine protection
| Materials | Stainless Steel SUS201/SUS304/SUS316,SPCC,SGCC, SECC,ALZINC,SPHC,Aluminum Sheet 1100/6061,Aluminium panel 5052 |
| Thickness | 0.3/0.4/0.5/0.6/0.8/1.0/1.2/1.5/1.2/1.3/1.5/3.0/3.5/4.0/4.5/5.0 |
| Size | Customized |
| Surface Finished | Powder Coating, Brushing, Polishing, Anodizing |
| Processing | Laser,CNC |
| Precision | GB/T1804-m |
| Surface Roughness | According to Customer |
| Cutting Mode | Laser, CNC, Shearing |
| Scope | Advertising light box, Electronic cabinet,Equipment cabinet, File cabinet, etc. |
| Certificate | ISO9001:2008 |
Our Advantage:
1. We have many experience in CNC machining service
2. Top quality guaranteed by skilled workers, managing system
and status of facilities.
3. We have many long cooperation supplier. supply ONE-STOP service
4. Customized size and spec /OEM.ODM available
5. 100% inspect before delivery
If you need to consult the price, please contact the business
department by e-mail.
We has had the ability to perforate for several years. Whether a
simple round hole pattern or a complicated multi tool pattern we
has the ability to perforate to customer requests and
specifications.
Our Services:
1. Reasonable price, best quality.
2. 24 hours on-line service, efficient and convenient after-sale service.
3. We have company and provide the direct price.
