|
[China]
Trade Verify
Address: No. 10, Zhuanchang Road, Xintang Town, Zengcheng, Guangzhou, China
Contact name:Jenny yang
Adcol Electronics (Guangzhou) Co., Ltd. |
|
Verified Suppliers
|
|
|
Peltier Module TEG Thermoelectric Generator For Power , Peltier
Power Generator
A Peltier device is a semiconductor device that
freely conducts cooling,heating & temperature regulation
through DC electricity
Thermoelectric power generating module (TEG) is one kind of power generating device which uses
the Seebeck Effect to convert heat source into electricity
directly. It has the characteristics of compact structure, reliable
performance, maintenance-free, working without noise, low-carbon
and green. The heat source of TEG is extremely extensive. It will
generate DC electricity continuously as long as there is
temperature difference between both sides of module. Besides
thermoelectric material, the factor which affects the generating
capacity and conversion efficiency of TEG is the temperature
difference. The larger temperature difference, the more generating
capacity and higher conversion efficiency will be obtained.
| Specification: | TEG1-127-1.6-1.4-250 |
| Max Temp of Hotside (deg C) | 250 |
| Cold side Temp (deg C) | <50 |
| Open Circuit Voltage (V) | 6.4 |
| Matched Load Resistance(ohms) | 3.3 |
| Matched load output power (W) | 3.1 |
| AC Resistance(ohms) Measured under 27℃ at 1000Hz | 1.95 |
| TEG Width (mm) | 40.0+/-0.1 |
| TEG Length (mm) | 44.7+/-0.1 |
| TEG thickness (mm) | 3.9+/-0.2 |
| Flatness (mm) | <=0.05 |
| Solder Melt Point (deg C) | 305 |
| Dices (couples) | 127 |
| High temp Wire (20AWG) | 150mm |
Performance Curve
