ZhengZhou ZhongDeBao Industrial Co., LTD |
Verified Suppliers
|
|
In addition to processing wood chips, the flat die sawdust pellet machine can also use crop waste such as corn stalks, straw, peanut shells, corn cobs, cotton stalks, weeds, branches, leaves, sawdust, bark, etc. as raw materials. The formed pellets are a new type of bioenergy, which can replace firewood, raw coal, fuel oil, liquefied petroleum gas, etc., and are widely used in heating, domestic stoves, industrial boilers, biomass power plants, etc.
The equipment is based on the inherent motion of the machine. The motor (or diesel engine) is used as the power to drive the gear to the main shaft. The powdery material is plasticized, the protein is denatured by temperature, and extruded from the die hole under the extrusion of the pressure roller. The required particle length can be obtained by adjusting the cutter, and then the formed particles are passed through the throwing tray. It is sent out of the machine through the discharge port.
After the mold is worn out, only the sub-mold needs to be replaced,
and the sub-mold plate can be used on both sides, which improves
the utilization rate of the mold and greatly reduces the cost; it
can also customize molds of various shapes and specifications
according to customer needs, which saves users a lot of later
machine maintenance costs.
2. Automatic constant temperature technology: This machine adopts
automatic constant temperature technology. The outdoor temperature
can be processed at minus 20 degrees or above zero. Do not work in
high temperature environment, greatly improving the service life of
molds and bearings.
3. Adjustable pressing density: The pressing density of this
machine can be adjusted arbitrarily between 0.8-1.4g/㎝3, and it can
press fuel pellets and livestock feed pellets.
4. In the process of developing the wood pellet machine, the user's
suggestions have been fully considered, and the technological
content and functions of the wood pellet machine have been improved
on the basis of similar or similar equipment. In terms of price,
the affordability and cost of use of the majority of users are
fully considered
5. Raw materials come from a wide range of sources, such as
sawdust, shavings, bark, sanding powder, waste wood, and branch
wood produced in wood processing and wood-based panel production;
various straws produced after harvesting crops; other types of
combustible raw materials Substances are used as raw materials,
without adding any adhesive, and can be processed by equipment to
produce biomass pellet fuel.
Name | PTO Pellet Mill |
---|---|
Roller | 2 Or 3 |
Capacity | 80-1200kg/h |
Package | Wooden Case |
Die | 4mm.6mm ,8mm,12mm |
Noise Level | ≤80dB |
Die Material | Alloy Steel |
Power | PTO Or Diesel Engine |
Tractor Horsepower | 10-80hp |