Active Member
|
[China]
Address: No. 233, Yanshan Road, Yuanzhou District, Yichun, Jiangxi, China
Contact name:Alice
Pego Group (HK) Company Limited |
|
|
IEC(EN) 60350-2 Figure 4 Vessels
1. Introduction
1) The vessels is strictly designed according to IEC/EN60350-2 Figure 4.
2) The vessels is made of low carbon steel having a maximum carbon content of 0.08%.
3) The maximum concavity of the base of the vessel is to be not more than 0.006a.
4) The lid is adapted to accommodate a stirrer.
5) The base of the saucepan shall not to be convex
2. Specification:
Diameter of Cooking Zone mm | Dimensions of the Vessel | ||
| a | b | c | |
| ≤145 | 145 | 140 | 3 |
| >145≤180 | 180 | 140 | ≧3≤5 |
| >180≤220 | 220 | 140 | ≧3≤5 |
Third-Lab calibration Certificate:
Relative products:
EN60350-2 Figure ZB.1 Vessels for Cookware
1. Introduction
The vessels are designed according to EN60350-2:2013 figure ZB.1, the wall of the vessel is made of 1.4301 stainless steel, the bottom of the vessel is made of 1.4016 stainless steel, and the lid is made of aluminum.
2. Parameter
Sizes of Standardised Cookware and Water Amounts
Diameter of the cookware bottom (outstide) mm | Diameter of the lid mm | Lid holde circle diameter mm | Number of holes on the circle | Total cookware height (outside) mm | Flatness of cookware bottom mm | Water load g | Cooking zone size category mm | Standardised cookware categories |
| 120±0.5 | 130±1 | 80±1 | 7 | 125±0.5 | ≥0 <0.075 | 650 | ≥100 <130 | A |
| 150±0.5 | 165±1 | 110±1 | 11 | 125±0.5 | ≥0 <0.075 | 1030 | ≥130 <160 | |
| 180±0.5 | 200±1 | 140±1 | 16 | 125±0.5 | ≥0 <0.075 | 1500 | ≥160 <190 | B |
| 210±0.5 | 230±1 | 170±1 | 22 | 125±0.5 | ≥0 <0.1 | 2050 | ≥190 <220 | C |
| 240±0.5 | 265±1 | 200±1 | 29 | 125±0.5 | ≥0 <0.1 | 2700 | ≥220 <250 | |
| 270±0.5 | 300±1 | 230/210a±1 | 18/18a | 125±0.5 | ≥0 <0.15 | 3420 | ≥250 <280 | D |
| 300±0.5 | 330±1 | 260/210a±1 | 23/22a | 125±0.5 | ≥0 <0.15 | 4240 | ≥280 <310 | |
| 330±0.5 | 365±1 | 290/270a±1 | 27/27a | 125±0.5 | ≥0 <0.15 | 5140 | ≥310 ≤330 | |
| a Number of holes are arranged on two hole circles | ||||||||
