Pego Group (HK) Company Limited |
|
Introduction:
Drop Box is designed according to IEC60529-2001 regarding the second characteristic numerals 1 and 2. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect.
Parameter:
Model | IPX12A-200 | IPX12A-600 | IPX12-B-800 | IPX12-B-100 | IPX12-C-800 | IPX12-C-1000 |
Type | Box type | Frame type | Wall-hung type | |||
Drip board area(mm) | 200*200 | 600*600 | 800*800 | 1000*1000 | 800*800 | 1000*1000 |
Pitch-row(mm) | 20 | 20 | 20 | |||
Aperture of drop (mm) | 0.4 | 0.4 | 0.4 | |||
Turntable diameter(mm) | 200 | 600 | 400 | 600 | 400 | 600 |
Product under test (max) | 20*20(cm) | 60*60(cm) | 50KG | 50KG | 50KG | 50KG |
Turntable speed | 1r/min | 1-10r/min | 1-10r/min | |||
Turntable angle | 00 or 150 adjustable | 00 or 150 adjustable | 00 or 150 adjustable | |||
Delivery rate | Manual(IPX1:1±0.5mm/min, IPX2: 3±0.5mm/min) | |||||
Test time (min) | 0-999 (adjustable) | |||||
Interior dimension(cm) | 35*35*80 | 75*75*120 | / | / | ||
Outer dimension(cm) | 55*43*123 | 95*83*163 | / | / |
IPX3 and IPX4 Oscillating Tube
Introduction:
Oscillating tube is designed according to IEC60529-2001 regarding the second characteristic numerals 3 and 4. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect.
Parameter:
Model | IPX34-800 | IPX34-1200 | IPX34-1600 | IPX34-200 | IPX34-400 | IPX34-600 |
Type | Frame type | Box type | ||||
Tube radius (mm) | R800 | R1200 | R1600 | R200 | R400 | R600 |
Speed | Back and forth at 1200: 4s; back and forth at 3600:12s | |||||
Delivery rate(L/mm) | 0.5-10 (adjustable) | 0.5-10 (adjustable) | ||||
Aperture of drop (mm) | 0.4 | 0.4 | ||||
Tube angle | ±600, ±1800 | ±600, ±1800 | ||||
Testbed dimension(mm) | 600 | 800 | 1200 | 200 | 400 | 600 |
Product under test(max) | 600 | 800 | 1200 | 100*100*100 | 300*300*300 | 500*500*500 |
Turntable speed (r/min) | 1-5 (adjustable) | 1-17 (adjustable) | ||||
Turntable height (mm) | 950-1550 | 1000-1700 | 1200-2000 | 100 | 300 | 500 |
Interior dimension(cm) | / | 50*50*50 | 90*90*90 | 120*120*120 | ||
Outer dimension(cm) | / | 100*68*144 | 134*108*176 | 174*148*195 |
IPX5 and IPX6 6.3mm/12.5mm nozzle
Introduction:
6.3mm and 12.5mm nozzle are designed according to IEC60529-2001 regarding the second characteristic numerals 5 and 6. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect.
Model | IPX56A | IPX56B |
Internal diameter of the nozzle (mm) | 6.3 (IPX5), 12.5 (IPX6) | |
Delivery rate (L/min) | 12.5±0.625 (IPX5), 100±5 (IPX6) | |
Turntable diameter (mm) | 600 | 600 |
Distance between nozzle and test object | 2.5-3m | |
Nozzle fixed type | Manual | mechanical |
Product under test (max) | 50KG | 60cm*60cm*60cm |
Water tank(cm) | 420L, 70*50*120 | |
Outer dimension(cm) | 103*78*135 | 360*118*185 |
Power | 380V | 380V |
Introduction:
Temporary Immersion Tank is designed according to IEC60529-2001 regarding the second characteristic numerals 7. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect. The distance from the bottom of sample under test to water surface should be 1m at least, the distance from top of sample to water surface should be 0.15m at least, and duration of the test is 30 min.
Model | IPX7-A | IPX7-B | IPX7-C | IPX7-D | IPX7E |
Interior dimension(cm) | 80*80*80 | 120*120*150 | 30*30*30 | 80*50*150 | 60*60*150 |
Outer dimension(cm) | 86*86*180 | 128*128*165 | 38*38*135 | 88*58*165 | 66*66*180 |
Water depth (m) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
Product under test (max) | 78*78*134cm | 118*118*134cm | 28*28*104cm | 78*48*134 | 58*58*134 |
Material | stalinite | stainless | stainless | stainless | stalinite |
Special size for customized.
IPX8 Continuous Immersion Tank
Introduction:
IPX8 continuous immersion tank is designed according to IEC60529-2001 regarding the second characteristic numerals 8. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect. IP8X test is subject to the agreement between user and manufacturer, the test simulates the condition under 0 to 50m below the water.
Model | IPX8-A | IPX8-B | IPX8-C | IPX8-D | IPX8E |
Outer dimension(cm) | 60*78*155 | 60*78*155 | 60*78*175 | 60*78*175 | 70*88*175 |
Diameter(cm) | 50 | 50 | 50 | 50 | 60 |
Height(cm) | 50 | 50 | 120 | 120 | 120 |
Thickness (mm) | 4 | 5 | 4 | 5 | 5 |
Pressure range | 0-0.3Pa | 0-0.5Pa | 0-0.3Pa | 0-0.5Pa | 0-0.3Pa |
Max pressure | 0.4Pa | 0.6Pa | 0.4Pa | 0.6Pa | 0.4Pa |
Test time | 0-999min | 0-999min | 0-999min | 0-999min | |
Power | 220V, 100W | 220V, 100W | 220V, 100W | 220V, 100W | 220V, 100W |
Water depth test range | 0-30m | 0-50m | 0-30m | 0-50m | 0-30m |
Special size for customized.
Introduction:
Designed according to IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand.
Specification:
Diameter of test sphere: | 50mm | Diameter of baffle: | 50mm |
Thickness of baffle: | 4mm | Diameter of handle: | 10mm |
Length of handle: | 100mm | ||
Material: insulating material (handle and baffle), metal (test sphere) |
Introduction:
Design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. This probe is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with finger.
Specification:
Diameter of dactylogryposis: | 12mm | Length of dactylogryposis: | 80mm |
Diameter of baffle: | 50mm | Length of baffle: | 100mm |
Material: Insulating material (baffle and handle), metal(dactylogryposis) |
3. Test probe C for IP3X testing
Introduction:
Designed according to IC61032 figure 3, meet the requirements of IEC60529-IP3, IEC60065,IEC60598 and etc. This rod is intended to verify the protection of persons against access to hazardous parts. It is used to verify protection against access with a tool.
Specification:
Length of test rod: | 100mm | Diameter of test rod: | 2.5mm |
Dimater of stop sphere: | 35mm | Diameter of handle: | 10mm |
Length of handle: | 100mm | ||
Material: Insulating material (handle, sphere), metal (test rod) |
4. Test Probe D for IP4X testing
Introduction:
Designed according to IEC61032 figure 4, meet the requirements of IEC60529-IP3,IEC60065,IEC60598 and etc. This wire is intended to verify the protection of persons against access to hazardous parts. It is used to verify the protection against access with a wire.
Specification:
Length of test wire: | 100mm | Diameter of test wire: | 1mm |
Diameter of stop sphere: | 35mm | Diamter of handle: | 10mm |
Length of handle: | 100mm | ||
Material: Insulation material (handle, stop sphere), metal (test wire) |
Test Probe 1 (500g steel sphere)
Introduction:
Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is intended to verify the degree of protection of enclosures against ingress of solid foreign objects have a diameter of 50mm or greater.
Specification:
1) Diameter of sphere: 50mm+0.05
2) Weight of the sphere:500g
3) Material: steel
Test probe 2 of IEC61032 figure 6 ( 15g steel sphere)
Introduction:
Designed according to IEC61032 figure 6, meet the requirement of IEC60529-IP2. The diameter of sphere is 12.5+0.2, this sphere is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having diameter of 12.5mm or greater.
Specification:
1) diameter of the sphere: 12.5mm (50.8mm, 63.5mm, 38.1mm choosable)
2) weight of the sphere: 15g
3) Material: steel sphere
4) Handle for optional