Active Member
|
[China]
Address: No. 233, Yanshan Road, Yuanzhou District, Yichun, Jiangxi, China
Contact name:Alice
Pego Group (HK) Company Limited |
|
ASTM B117-11 Salt Spray Test Chamer applicable to the salt spray corrosive test
Salt spray test chamber is applied to measure the reliability of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to different standards (JIS, ASTM, CNS, GB), neutral salt mist (NSS) and acidy salt spray test (CASS). This equipment can meet the requirements of the both.
Principle: Absorb the salt water by Bernoulli principle, and the salt water will be atomized by nozzle symmetrically, no block, no crystallize. The heater in the chamber keep the temperature.
Temperature requirement:
Lab:35~50℃ (NSS@35℃, CASS@50℃)
Air barrel: 47~63℃ (NSS@47℃, CASS@63℃)
Model | F-120A | F-90A | F-60A |
Interior size(W*D*H) | 1200*800*500(mm) | 900*600*500(mm) | 600*450*400(mm) |
Exterior size((W*D*H) | 1700*950*1210(mm) | 1380*800*1150(mm) | 1070*580*1030(mm) |
Power (single phase) | 220V, 3KW, 50Hz | 220V, 1.5KW, 50Hz | 220V, 1.5KW, 50Hz |
Accessories | V rack, nozzle, spray tower, NACL (2 bottles) and etc. | ||
