Active Member
|
[China]
Address: 29th floor room 15 No.5 Commercial building B block ,the 2nd section Wuchang Fu west,No.32 Wenzhi street,Hongshan district,Wuhan city,China
Contact name:
Hubei Nuojin Sen Technology Co.,Ltd |
|
|
LED and PCB industry thermal curable solder resist mask pcb ink
Product introduction
A high-quality double liquid type heat curing anti welding LED white ink,with good printing,drying and coating hardening after excellent heat resistance and resistance to chemical,which is especially suitable for single-sided and double-sided LED circui board.
Technical guidance form is as follows:
| color | white,yellow,red,black,blue,green |
| viscosity | 180+/-20dpa.s |
| mixing ratio | main agent:hardening agent,8:2 |
| after mixing time | 24 hours,less than 25 degrees to avoid light preservation,6hours to use better results |
| diluent | can be diluted with butylether |
| solderability | 270+5degrees C,10 senconds 3 times |
| hardness | 6H |
| close sex | 100% |
| resistance to chemical | qualified |
| insulation resistance | 1*10 14 |
| moisture resistance | ipc-tm-650 class 3 |
| environmental standards | comply with ROHS directive requirements |
| storage security | 25+5C,stored in a cool and dry condition for 6 months |
Operating parameters
1. Pretreatment of substrate surface
With in 3-5% sulfuric acid water cleaning ,grinding brush wheel mesh was 500,800,1000,1200 mesh ,drying temperature of 80 DEG C to 120 DEG C,grinding mark 10mm-20mm watermill rupture time is 20s
2. Open oil
Ink is the main agent and curing agent after mixing the mixing proportion according to the requirements of our company,1KG 10-15 min ,5KG 30min mixing ,stirring,stiring after still more than 15min,so that the ink viscosity stability after use.Do not need to add thinner ink,such as viscosity is too large,can be used to adjust the special diluent,but the amount can not be more than 5%.In order to make good adhesion,it is better to do the cheaning work first,
3. Screen printing
Screen printing:take 100-120T nylon diagonal net tension,23+1N.
Rubber scrper scraping:65 degrees-75degrees of good elasticity,sharp edges,squeegee angle of 5-20 degrees,2-6kg/cm-pressure
Printing film thinkness:10-20um
Static:within 15-30min
4. Bake
Single printing and printing :the first face 150+5 degrees ,15-20min
Second faces:150 degrees,40-45 min
Duplex printing:150+5 degrees,45-60min
Matters needing attention:
This specification in all parameters and results for the company's test data,can only be done for early reference,as a gurantee and basis,paractical application to customers for the field test conditions and test results.
Our products include:
● Solvent Printer, ECO Solvent Inkjet Printer
● Flatbed UV Printer, Roll-to-Roll UV Printer
● Textile / Fabric Printer
● Printer Ink
● Printer Spare Part( Printhead...ect.)
What Service Can We Supply:
1.One year warranty, life-long after-sales service.
2.Instant online support service.
3.One to one professional technical free training. We can send
engineers to install the machine overseas.
4.For printer ink, the more you order, the cheaper the price !
5.Welcome to visit our Company or Factory at any time.
Our company:
Hubei Nuojinsen Technology Co.,Ltd ,after years of unremitting efforts,Combined with foreign advanced technology and process,Production of PCB ink has reached the technical level, conforms to the requirement of RoHS environmental protection directive, with excellent quality and excellent service is deeply trusted by customers.
