Home Companies Quanhong FASTPCB

Fr4 Tg150 Fr4 High Tg Pcb Material Tg 130 Tg 140 Tg 155 Tg 180

Active Member

Contact Us

[China]

Address: Building B, Shangxing West Industrial Zone, No. 1001, West Ring Road, Shajing street, Bao'an District, Shenzhen, Guangdong, China

Contact name:Yu

Quanhong FASTPCB

Fr4 Tg150 Fr4 High Tg Pcb Material Tg 130 Tg 140 Tg 155 Tg 180

Country/Region	china
City & Province	shenzhen guangdong
Categories	Connectors

Product Details

High Tg Printed Circuit Board

High Tg refers to high heat resistance. Generally, the Tg board is more than 130 degrees, high Tg is generally more than 170 degrees, and medium Tg is about more than 150 degrees. Usually, THE PCB printed board with Tg≥170 degrees is called high Tg printed board. With the rapid development of the electronic industry, especially the electronic products represented by computers are developing towards high functionalization and high multilayer, which requires the higher heat resistance of PCB substrate materials as an important guarantee. The appearance and development of high density installation technology represented by SMT and CMT make PCB more and more dependent on the support of high heat resistance of substrate in small aperture, fine line and thin form.

The Tg of substrate is improved, and the heat resistance, moisture resistance, chemical resistance, stability and other characteristics of printed board will be improved and improved. The higher the TG value, the better the temperature resistance of the plate, especially in the lead-free process, high TG is more widely used.

Therefore, the difference between general FR-4 and high Tg FR-4 is that there are differences in mechanical strength, dimensional stability, adhesion, water absorption, thermal decomposition, thermal expansion and other conditions of the material in the hot state, especially in the case of hygroscopicity after heating. High Tg products are significantly better than ordinary PCB substrate materials.

HDI Advanced Technology

Item		HDI Advanced Technology
Item		2019	2020	2021
Structure		5+n+5	6+n+6	7+n+7
HDI Stack Via		AnyLayer(12L)	AnyLayer(14L)	AnyLayer(16L)
Board Thickness(mm)	Min. 8L	0.45	0.4	0.35
	Min. 10L	0.55	0.45	0.4
	Min. 12L	0.65	0.6	0.55
	MAX.		2.4
Min. Core Thickness ( um )		50	40	40
Min. PP Thickness ( um )		30(#1027PP)	25(#1017PP)	20(#1010PP)
Base Copper Thickness	Inner Layer ( OZ)	1/3 ~ 2	1/3 ~ 2	1/3 ~ 2
Base Copper Thickness	Outer Layer ( OZ )	1/3 ~ 1	1/3 ~ 1	1/3 ~ 1
Item		HDI Advanced Technology
Item		2019	2020	2021
Min. Mechanical Drill hole size(um) **		200	200	150
Max. Through Hole Aspect Ratio *		8:1	10:1	10:1
Min. Laser via/Pad Size ( um )		75/200	70/170	60/150
Max. Laser Via Aspect Ratio		0.8:1	0.8:1	0.8:1
Laser Via on PTH(VOP)design		Yes	Yes	Yes
Laser X type through hole(DT≤200um)		NA	60~100um	60~100um
Min. LW/S (L/S/Cu, um)	Inner Layer	45 /45 /15	40/ 40/ 15	30/ 30 /15
Min. LW/S (L/S/Cu, um)	outer Layer	50 /50/ 20	40 /50 /20	40 /40 /17
Min BGA Pitch (mm)		0.35	0.3	0.3
Item		HDI Advanced Technology
Item		2019	2020	2021
Solder mask Registration (um)		+/- 30	+/- 25	+/- 20
Min. Solder Mask Dam (mm)		0.07	0.06	0.05
PCB Warpage Control	>= 50ohm	+/-10%	+/-8%	+/- 5%
PCB Warpage Control	< 50ohm	+/- 5ohm	+/- 3ohm	+/- 3ohm
PCB Warpage Control		≤0.5%	≤0.5%	≤0.5%
cavity Depth accuracy (um)	Mechanical	+/- 75	+/- 75	+/- 50
cavity Depth accuracy (um)	Laser directly	+/- 50	+/- 50	+/- 50
Surface Finishing		OSP,ENIG,Immersion Tin,Hard Au, Immersion Ag	OSP,ENIG,Immersion Tin,Hard Au,Immersion Ag, ENEPIG

HLC Advanced Technology

Item		HLC Advanced Technology
Item		2019	2020	2021
Max Panel Width (inch)		25	25	25
Max Panel Length (inch)		29	29	29
Max Layer Count (L)		16	18	36
Max Board thickness (mm)		3.2	4	6
Max Board thickness Tolerance		+/-10%	+/-10%	+/-10%
Base copper Thickness	Inner layer ( OZ )	4	6	8
Base copper Thickness	Outer Layer ( OZ )	2	3	4
Min DHS ( mm )		0.2	0.15	0.15
PTH Size Tolerance ( mil )		+/-2	+/-2	+/-2
Back Drill (stub)( mil )		~ 3	~ 2.4	~ 2
Max. AR		12:1	16:1	20:1
Item		HLC Advanced Technology
Item		2019	2020	2021
M-drill tolerance	Inner layer ( mil )	DHS + 10	DHS + 10	DHS + 8
M-drill tolerance	Outer Layer ( mil )	DHS + 8	DHS + 8	DHS + 6
Solder mask Registration (um)		+/- 40	+/- 30	+/- 25
Impedance control	≥50ohms	+/-10%	+/-10%	-/-8%
Impedance control	<50ohms	5 Ω	5 Ω	4 Ω
Min LW/S (Inner)@1oz base Cu ( mil )		3.0 / 3.0	2.6 / 2.6	2.5 / 2.5
Min LW/S (Outer)@1oz Cu ( mil )		3.5 / 3.5	3.0 / 3.5	3.0 / 3.0
Max dimple for POFV ( um )		30	20	15
Surface Finishing		ENIG, Immersion Ag, OSP, HASL, Immersion Tin, Hard Au

Packaging & Delivery
Packaging Details:	Inner: vacuum packing or Anti-static package, Outer: export carton or according to the customer's requirement.
Port:	Shenzhen or Hongkong
Lead Time:	Quantity(Pieces)	1-10	11-100	101-1000	>1000
	Est. Time(days)	20	21	25	To be negotiated

FAQ:

Q: What service do you have?
FASTPCB: We provide turnkey solution including PCB fabrication, SMT, plastic injection & metal,final assembly, testing and other value-added service.

Q: What is needed for PCB & PCBA quotation?
FASTPCB: For PCB: Quantity, Gerber file and technic requirements(material,size, surface finish treatment, copper thickness,board thickness).
For PCB: PCB information, BOM,Testing documents.

Q: How to keep our product information and design file secret ?
FASTPCB: We are willing to sign a NDA effect by customers side local law and promising tokeep customers data in high confidential level.

Q: What are the main products of your PCB/PCBA services?
FASTPCB: Automotive, Medical, Industry Control, IOT, Smart Home, Military, Aerospace.

Q: What is your minimum order quantity (MOQ)?
FASTPCB: Our MOQ is 1 PCS, sample and mass production all can support.

Q: Are you factory?

FASTPCB:Shangxing West Industrial Zone, Xihuan Road, Shajing Street, Bao 'an District, Shenzhen, Guangdong province, China