Active Member
|
[China]
Address: No.40 Shinan Street,Dawen Village,DongchongTown, Nansha District,Guangzhou City,China
Contact name:Don-Li
Guangzhou Mankun Electronic Co., Ltd. |
|
|
Diameter 108mm Round PCB led Module With 12pcs LumiLEDs 3030 For CeilingLights
Optical characteristics of PCB LED module
| Item Number | DK-ZHOU-12H-3030-6S2P-D108MM-AL19348 |
| Power | 10W |
| Siza | Φ108mm |
| Input Voltage | 36V |
| LED Quantity | 12pcs 3030SMD |
| CCT | 2700K-3300K/4000K-4500K/5500K-6500K |
| Material | aluminium alloy |
| Beam angle | 180° |
| Power Factor | >0.9 |
| CRI | >80 |
| Lifespan | 50,000 hours |
| Installation Method | Surface mounted |
| Warranty | 3 years |
Shipping way of PCB LED module
We accept customer-appointed shipping agencies for pick-up orders at our factory. And clients can also use our company's cooperated, shipping agents. We have the below shipping ways.
1) Courier: DHL, FedEx, TNT, around 5 days to arrive at your hand.
2) Air shipping: around 5~7 days to arrive at your nearest airport
3) Sea shipping: around 10 to 30 days depending on the seaport.
( We have warehouses in the UK, Germany, USA. We accept DDP service.)
FAQ of PCB LED module?
Q: What service do you provide?
A: We do below 2 kinds of service:
1) OEM: Clients provide Gerber files, software, and BOM list, we manufacture PCBA.
2) ODM: Clients provide function descriptions, and we will develop the hardware, software, and PCBA production.
3) Turn-key solution for both outer enclosure and PCBA electronics: clients provide electronics function descriptions and enclosure sketches, and we will work on mechanical designing, PCBA developing, prototypes, tooling, assembly, testing, packing, and delivery.
Q: What files you required for the quotation?
A: 1) PCBA production: Gerber file and BOM list, testing, and packing requirements.
2) PCBA development: detailed function descriptions in word file.
3) Enclosure and PCBA development: detailed function descriptions in word file and sketches in JPG or AI file.
Q: How long do PCBA prototypes take?
A: 1) If clients provide a Gerber file and BOM list, it takes as fast as 3 days.
2) If we develop PCBA, it takes around 3 days to 15 days depending on how complicated the functions.
Q: How can you ensure quality?
A: First, IQC will check all incoming raw materials before SMT production.
Second, there is Initial Sample Inspection before mass production. If all is OK, mass production will be arranged.
Third, during each SMT process, there are routing inspectors, and each process in-charging person eye-checking welding points and parts.
Last but not the least, there are X-ray, AOI, magnifier, customized fixture functions tests after SMT is finished, as well as eye checking during DIP, ICT (In-Circuit Tester), and FCT (Function Check Test ) by customized fixture after reflow, eye checking during cleaning and before packing processes.
Q: What is your defective rate in mass production?
A: less than 0.2%.
Q: How to do with defective products?
A: Firstly, there is 0.3% spare based on your order.
If you received defectives more than 0.3% from mass production, we will send you an equal quantity for replacement by DHL air on our charge.
