|
[China]
Trade Verify
Address: 3rd Floor,Building A,Sha Tang Bei Fang Yong Fa Industrial Area,Sha Jing, Bao an, Shenzhen, China
Contact name:Rudi Jin
Shenzhen Hansome Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Precision 01005 0.3Pitch CCD Digital Camera SMT Solder Paste Stencil Printer
Introduction
GLE Automatic solder paste printing machine is a high-end machine for SMT large-scale applications. The width of Gt-S is only 2830mm. It can perfectly meet the printing process requirements of 01005,0.3pitch and other fine spacing, it's high precision and high speed.
Specification
| Model | GLE |
| Max PCB Size | 510x510mm |
| Min PCB size | 50x50mm |
| PCB thickness | 0.4-6mm |
| Max board weight | 5kg |
| Transport height | 900±40mm |
| Board edge gap | 2.5mm |
| Board height | 23mm |
| Transport direction | L-R,R-L |
| Transport speed | max 1500mm/s, program control |
| Transport method | One stage |
| WIdth adjustment | automatic |
| I/O interface | SMEMA |
| PCB positioning (support method) | Magnetic pin/support block/up-down table |
| PCB clamping system | Patented over the top clamping |
| Side clamping | |
| Adsorption function | |
| Print snap-off | 0-20mm |
Print mode | one/twice |
Print Speed | 10-200mm/sec |
Print Mode | One /Twice |
Squeegee Type | Rubber /steel Squeegee Blade(Angle 45°/55°/60°) |
| Print pressure | 0.5-10kg |
| Template fram size | 470*370mm~737*737mm |
Cleaning System | Droops of rain type cleaning system |
| Reinforced vacuum absorption | |
| Dry, wet vacuum three modes | |
CCD FOV | 10x8mm |
| Fiducial mark types | Standard Fiducial mark shape |
| Pad | |
| Hole | |
| Camera system | Look up/down optics structure |
| CCD digital camera | |
| Geometry pattern match |
Machine Performance
| Model | GLE |
| Repeat position accuracy | ±12.5um@6,CPK≥2.0 |
| Print accuracy | ±20um@6,CPK≥2.0 |
| Print cycle time | ＜7.5 sec |
| Based on the third party test system(CTQ) verify the actual solder paste printing position repeat precision | |
Whole Machine Specification
Power supply | AC:220±10%,50/60HZ, 3.0KW |
Air pressure | 4~6 kgf/cm² |
Air consumption | around 5L/min |
Operating temperature | -20℃~+45℃ |
Operating humidity | 30%~60% |
Machine Dimensions(without tower light) | 1240(L) x 1410(W) x 1500 (H)mm |
Machine Weight | Approx: around 1100Kg |
Features
1, GKG special adjustment jacking platform. Stable and easy to adjust, it can quicklyadjust the pin jacking height of PCB with different thickness.
