Micro Computer Controlled PCB Cutting Machine 300 500 mm / Sec Feed Speed

 
 
Micro Computer Controlled PCB Cutting Machine 300 500 mm / Sec Feed Speed

YES-1 PCB Depanelizer Router Feature:

1. With completely independent development and controlled by micro-computer process, the machine is very accurate and stable. It can cut a single board within the length from 0 to 360mm off with a cut.

2. The feeding speed is adjustable with 500mm/s and 300mm/s. If the speed is fast enough, the quality is improved for the board is cut without burrs and rough selvedge .

3. The feed distance of the knife wheel is from 0 to 360mm(the tool length can be customized ) . 4. The height of the knife wheel is fine-tuning from 0 to 2mm so that it is suitable for PCB of various kinds of thickness and the depth of V-CUT groove.

4. The height of work station is regulable from 0 to 50mm.

5. The forward and stop point can be set according to the plate length when feeding, the stop point for artificial setting.

PCB Depaneling Application:

1. PCB thickness: 0.2-3mm

2. PCB material: Aluminum PCB, Copper Substrate, FR4 and Glass fiber Board etc

Operation Manual

Notes:

1. Before using the machine, please read this manual carefully, and it will help you operate it smoothly.

2. The machine is only designed for circuit board with pre-scored V-cut, does not use in other purposes.

3.  When operate this machine, do not wear too loose clothes. Long hair should be tied up to prevent it from being entangled.

Customers FAQ About PCB Separator YES-1: