Shenzhen Found Printed Circuit Board Co., Ltd. |
|
Commodity Introduction
This is a type of RO4350B PCB for the application of Splitter. It's
a 2 layer board at 0.9mm thick.
The base laminate is from Rogers Corp.. Solder mask and silkscreen
from Taiyo. It's fabricated
per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or
panels are packed
separately.
Parameters & Data Sheet
PCB SIZE | 145 x 91mm=1PCS |
BOARD TYPE | |
Number of Layers | Double sided PCB |
Surface Mount Components | YES |
Through Hole Components | NO |
LAYER STACKUP | copper ------- 35um(1oz)+plate TOP layer |
RO4350B 30mil (0.762mm) | |
copper ------- 35um(1oz)+plate BOT Layer | |
TECHNOLOGY | |
Minimum Trace and Space: | 5.4mil/6.3mil |
Minimum / Maximum Holes: | 0.45/4.1mm |
Number of Different Holes: | 7 |
Number of Drill Holes: | 173 |
Number of Milled Slots: | 1 |
Number of Internal Cutouts: | 0 |
Impedance Control | NO |
BOARD MATERIAL | |
Glass Epoxy: | RO4350B 30mil (0.762mm), Tg 288ºC |
Final foil external: | 1.5oz |
Final foil internal: | 0oz |
Final height of PCB: | 0.9mm ±0.1 |
PLATING AND COATING | |
Surface Finish | Electroless nickel over Immersion Gold (ENIG)( 1 µ" over 100 µ" nickel) |
Solder Mask Apply To: | Top and Bottom, 12micon Minimum. |
Solder Mask Color: | Green, PSR-2000GT600D, Taiyo supplied. |
Solder Mask Type: | LPSM |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | TOP |
Colour of Component Legend | White, IJR-4000 MW300, Taiyo Supplied. |
Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
VIA | Plated Through Hole(PTH) |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" (0.15mm) |
Board plating: | 0.0030" (0.076mm) |
Drill tolerance: | 0.002" (0.05mm) |
TEST | 100% Electrical Test prior shipment |
APPLICATION: | Splitter, 24V Inverter Analog Device Variable Speed Drive IP CCTV 3G Signal Booster |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
Found Quality Policy
Found has developed series of management procedures and approaches
to assure that PCBs
are in compliance with the customers' requirements, inclusive of
selection of the vendors, work
in progress (WIP) inspection, outgoing delivery inspection and
customer service etc.
Control of Production Process
Right manufacturing instruction (MI), comprehensive equipment
management and maintenance
and process control, strict WIP inspection and monitoring as well
as working instruction, all those
make the whole fabrication process totally controlled.
Final Control and Inspection
All PCBs have to be gone through the open and short test as well as
visual inspection after passed
the specified physical tests. We own various advanced test
equipment including customized, probe
flying test machines to guarantee that each PCB is 100% tested.
Product Delivery Audit
We set up a dedicated FQA department to inspect the PCB products
according to the customer's
specifications and requirements by sampling. Qualified PCBs are
going to be packed.
FQA also has to carry out a 100% audit of the warehouse packing and
shipping products, including
product number, customer number, product quantity, shipping address
and so on prior to shipment.
Customer Service
We sets up a professional customer service team to proactively
communicate with customers and
timely deal with the customers' feedbacks. We highly focus on
customers' needs and to understand
customers' demands, timely to adjust the policy of customer service
and PCB product
requirements.