Shenzhen Found Printed Circuit Board Co., Ltd. |
|
PCB Rogers 0,762 Mm Thinckness and heavy copper pcb manufacturers
Technical Capabilities | |
Item | process capacity |
No. of layer | Double side to 20 Layers.Build up 2+N+2,Double Sided aluminium PCB , metal core PCB |
Materials | FR-4 ,CEM-1/3,HF material,Teflon,Rogers,Bergquist,high TG,PTFE,aluminum. |
Board thickness | 0.1mm to 4.0mm 0.4mm up for 4 layers 4.0mm for 16 layers |
Copper cladding | (inner)18um to 105um (Outer)12um to 210um |
Maximum size | 500*1500mm |
Minimun trace | (width/spacing)0.075mm |
Hole size tolerance | (NPTH)±0.075mm (PTH)±0.05mm |
Diameter tolerance | (NPTH)±2mil (PTH)±3mil |
Min.Distance hole/line to edge | 20mil 12mil |
Minimun welding ring thickiness | 0.1mm |
Minimun isolation pad | 10mil |
Minimun solder mask width | 0.075mm |
Minimum solder window | 0.05mm |
Impedance tolerance | ±10% |
Minimun hole size | Finish,mechanical -0.15mm Finish,laser -0.10mm |
Aspect ratio | Vias≤10:1 Build vias≤0.7:1 |
Surface finishs | HAL,Immersion gold,Flash gold, Pre-flux(OSP),Selective gold plates and gold tabs,Stripping blue glue,Carbon oil,Pure tin plating,silver plating,tin plating,thickness Finger plating. |
Quality Standards | Accept spcifications of customer and IPC(class II or III) |
Pls see our pcb catalog below:
1. single side pcb
2. double side pcb
3. Multilayer pcb(3-26+ layers)
4. Flexible PCB(FPC)
5. Rigid-flex PCB board
6. Aluminum PCB board for LED(1-4 layers)
7. MCPCB board (1-4 layers)
8.Ceramic PCB(1-4 layers)
9. HDI pcb board
10. High frequency PCB
11. PCB assembly
Features and benefits
1. The dielectric constant (DK) is low and stable, so the signal
transmission is good without delay.
2. The characteristic of low dielectric loss makes the signal loss
at a lower level, which makes the signal
transmission of the whole equipment excellent.
3. Delamination of copper foil will not be caused by the change of
cold and heat due to the consistency
with the thermal expansion coefficient of copper foil.
4. Immersion gold has excellent surface planarity, particularly
helpful for PCBs with BGA packages or even CSP mounted components
to reduce failure rate during assembly and soldering.
5. UL, ISO certified PCB manufacturing factory.
6. Make delivery on time keeping 98% on-time-delivery rate.
7. Eligible products rate of first production: >95%
8. Experienced sales persons provide skilled customer services.
9. Fast and flexible to save the time of production from prototype
to standard production
Your Name: | |
*E-mail: | |
Phone: | |
Company: | |
Title: | |
*Content: | |
Send |