|
[China]
Trade Verify
Address: Building 3, No.12, Wusha Zhenyuan Road, Chang'an Town, Dongguan City, Guangdong Province
Contact name:
Dongguan Shenhua Mechanical and Electrical Equipment ... |
|
Verified Suppliers
|
|
|
SME-6100 PCBA Flux Inline Cleanig Machine can be used to clean no clean flux PCBA.
Good cleaning performance: PCBA flux residuals,soder balls and
particles on PCBA, such as: rosin flux, water-soluble flux ,
non-clean flux ,solder paste and other organic and inorganic
contaminations.
Small footprint cleaning section and process: Wash+ Chemical
isolation+ Pre-rinse+ Rinse+Final rinse+ Air blow dry+ Hot air
dry.
SHENHUA new developed spray cleaning technology, the system
has following advantages:
1. PCBA flux in line cleaning system.
2. Long wash sections + DI water rinse section+ Air blow
section +hot air dry section.
3. Liquid wash repeatedly and fresh DI water supply automatically
and overflow to replace.
4. Up/down spary system on wash and rinse sections.
5. Liquid and DI water spray pressure can be adjusted for dirrerent
PCBA cleaning requirements.
6. SUS304 stainless PCB flat conveyor net system.
7. PLC control system, English operation interface, easy
operation.
8. Total SUS304 structure, Acid and Alkali corrosion resistance.
Machine Spec:
| S/N | Item | SME-6100 Spec |
| 1 | conyeyor net | 600mm |
| 2 | conveyor speed | 0.1~1.5m/min |
| 3 | conveyor height | 900±50mm |
| 4 | conveyor direction | Left to Right |
| 5 | PCB size | L400*W600mm as max |
| 6 | PCB height | 85 mm as max(with component) |
| 7 | wash tank capacity | 140L |
| 8 | rinse tank capacity | 40L+80L |
| 9 | DI water consumption | 400~800L/H |
| 10 | exhausted air | 30m³ |
| 11 | electric control | PLC+TP |
| 12 | Resistivity range | 0~18MΩ |
| 13 | PH range | no |
| 14 | air supply | 0.5Mpa, 200~400L/min |
| 15 | power supply | AC380V,50/60HZ, 3P,113KW |
| 16 | machine size | L4500*W1750*H1980mm |
| 17 | machine weight | 2400KG |
Q1: What kind of PCBAs can SME-6100 clean?
A1: SME-6180 is a short and compact PCBA flux cleaning machine. It
can clean all kinds of flux PCBA.
Q2: Why is it 110KW?
A2: in wash section, it has 3x12KW heater;in pre-rinse section,it
has 1x12KW heater; in Rinse section, it has 1x12KW heater; in hot
air dry section ,it has 2x7.5KW heater, and we also have air
blowers, electric pumps.
Q3: What is the liquid temperature and DI water temperature?
A3: liquid temperature can heat to 80℃; DI water can heat to 60℃.
Q4: What is the liquid consumption per hour?
A4: It depends on liquid itself and temperature, we install
liquid cool condenser ,normallyconcentrated liquid 1L/ Hour.
