|
[China]
Trade Verify
Address: Building 3, No.12, Wusha Zhenyuan Road, Chang'an Town, Dongguan City, Guangdong Province
Contact name:
Dongguan Shenhua Mechanical and Electrical Equipment ... |
|
Verified Suppliers
|
|
|
Double-Station Rotation Spray Clean Machine Car Engine Cylinder Block Engine Cylinder Head, Car Filter Wash Machine SME-5200 is a high pressure spray cleaning machine.
It has 1 wash system and 1 rinse system, double station can clean car parts very clean.
Wash process: put in car parts--liquid spray wash--water spray rinse--hot air blow dry. the round basket turns at certain speed while machine is working.
SME-5200 is controlled by PLC, English operation interface. All kinds of material parts can be cleaned in the machine.
Machine features:
1.Total SUS 304 structure, resist Acid and Alkali corrosion, firm
and attractive.
2. φ1000mm diameter big cleaning round basket, batch clean.
3. Clean liquid spray from 3 spray rods on upper/lower and front
side, cleaning basket rotates during cleaning.
4. Clean liquid pressure up to 6kg/cm2, make it throughly clean of
whole fixture.
5. PLC program control, Touch-panel operation,cleaning parameters
can be set and change conveniently.
6. Easy One-button operation, high pressure clean+ rinse+ hot air
dry, all process complete in a cycle automatically.
7. Clean liquid and water heat and temperature keeping function.
8. Closed-loop clean and rinse, clean detergent and rinse water are
cycling filtered and reused in the machine.
9. Standard equipped solution and water auto fill in and discharge
function.
10.The parts are clean and dry after cleaning, standby and ready
for use at any time.
Machine spec:
| Item | SME-5200 Spec |
| Cleaning basket size | Φ1000mm x H 200mm. Clean height 450mm |
| Spray unit | Upper/lower/front side,720°, all-around spray |
| 3-level filter system | 2mm /100um/20um filters |
| Clean tank capacity | 80L |
| Rinse tank capacity | 80L |
| Clean spray pressure | 5~6 kg/cm2 |
| Clean time | 5~15 Min |
| Rinse time | 1~3 Min |
| Dry time | 10~20Min |
| Clean liquid heat temp | Room temp~80℃ |
| Rinse water heat temp | Room temp~80℃ |
| Hot air heat temp | Room temp~90℃ |
| Clean/Rinse pump power | 2.2KW/1.1kw |
| Liquid/Water heaater power | 9KW |
| Hot air heat power | 9KW |
| Air blower power | 4.0KW |
| Air supply | 0.5~0.7Mpa |
| Power supply | 3 P,AC 380V,50/60HZ,33KW |
| Machine size | L1400 x W2000 x H 1450 (mm) |
| Machine weight | 600KG |
Question and Answers:
Q1: Can SME-5200 clean all kinds of material parts?
A1: Yes, it can.
Q2: How many partss can SME-5200 clean one time?
A2: It depends on parts size. for L200xW150mm parts, it can clean about 40PCS one time.
Q3: What is cycle time of SME-5200?
A3: It is about 40~45 miutes, including wash,rinse and hot air blow dry time.
Q4: Does the round basket turns with setting speed?
A4: Yes, the 1000mm diamater round basket turns at the speed of 15~20RPM
Comparison pictures before and after cleaing:
