Active Member
|
[China]
Address: 4th Floor, Factory No. 2, Botou Industrial Zone, Botou Village, Chashan Town, Dongguan City
Contact name:Frank
Dongguan Senkong Electronic Technology Co., Ltd |
|
|
1w - 15w Charging Meaty Plant Growth Lamp PCBA Circuit Board With Center Indicator
Specification
| Color temperature | 3000K |
| Control panel | Key logic |
| Input power | 12-24v ; 1A-2A |
Man-machine interface display: (display screen, indicator light, etc) | No |
| Brightness | 10% brightness |
| Mode | Long-term business trip mode |
| Input and output interface type | DC/USB |
Operation mode
Travel: Long-term business trip mode:
1. The first time the button is pressed, the work indicator lights up in white and enters the business trip mode.
1.1 The main light of the plant is turned on by itself. (10H on-14H off)
1.2 In this mode, the frequency of the output interface of the water pump and atomizer is changed: to avoid damage by no one adding water
1.3 When the plant main lamp 14H is turned off, the fan starts automatically. (At night ventilation)
Automatic operation mode
1.1 The main light of the plant is turned on by itself. 10 hours on and 14 hours off
1.2 When the main light of the plant is turned on at 10H, the output interface of the water pump is switched on and off according to the working frequency of 10 minutes and 10 minutes.
1.3 When the plant main lamp 14H is turned off, the fan starts automatically. (At night ventilation)
Ventilation: Press the button once to start the fan, and the corresponding indicator light turns white.
Feature
Plants absorb different wavelengths of sunlight, and artificial light sources can be configured according to the characteristics of plants.
As the light source of plant photosynthesis, it is reasonable and effective. LED technology is far superior to other artificial light sources in light quality, light quantity and light cycle control of plant photosynthesis.
Package
1. Anti-static bubble film shall be used for packaging and packing after piecing together
2. Matters needing attention when packing
1) Considering the force comprehensively, the direction set up after PCBA packing should be the same as that of corrugated carton
2) Avoid the collision between PCBas during packaging; Appropriate placement and bubble film thickness should be selected.
Service
1. PCB Development and Design:
2. PCB Manufacturing From 1 to 32 Layers:
3. Component Sourcing:
4. PCB Assembly:
5. Write Program for Customers:
6. PCB/ PCBA Test.Semi-Automatic
