Active Member
|
[China]
Address: 4113-4116# A Area, HSST PARK, BAO'AN District, Shenzhen, China
Contact name:Wendy
Abis Circuits Co., Ltd. |
|
|
8 Layer HDI Printed Circuit Board, FR4 IT180 Multilayer Immersion
Gold PCB
Abis Circuits Co., Ltd is a professional PCB manufacturer which was established on Oct,
2006 and focus on double side, Multilayer and HDI pcb mass
production.
Our mission:
PCBs for demanding customers, on time with zero defects, produced sustainably at the lowest total cost. Manufacturing many different types of PCBs in smaller series (High-mix, Low-volume) involves constantly adjusting, adapting and problem solving.
Our responsibility:
We know that the PCB is a critical key component for our customers. And we know for sure that anything can happen during the complex production process involved – and it often does. In our world, taking full responsibility means a lot of things, including a responsible and sustainable approach in everything we do – socially, environmentally and ethically. When a problem occurs, we try as hard as we can to understand the problem and find a solution. Our mindset is that we own the problem and don’t leave until we have cleared it up.
Product Details:
| No. of Layers | 1-20 |
| Max. Board Size | 860*610mm |
| Board Thickness | 0.2-6.0mm |
| Copper Thickness | 0.5OZ-6OZ |
| Material | Various |
| Surface Finish | Various |
| Soldermask | Various |
| Minimum Soldermask Thickness | 0.025mm |
| Minimun Soldermask BridgeDam | 0.15mm |
| Minimum Soldermask Clearance | 0.075mm |
| Peelable Colours | Blue |
| Peelable Minimum Feature | 0.5mm |
| Peelable Maximum Tented Hole | 3.0mm |
| Scoring Angle | 30 Degrees |
| Min. Remaining Thickness | 0.3mm |
| Min. Distance to copper (From center of scoring line) | 0.5mm |
| Min. Track | 0.1mm |
| Min.Gap(TrackTrack,TrackPad,PadPad) | 0.1mm |
| NPTH Min. Drill Size | 0.2mm |
| Plated Drill Size | ± 0.075mm |
| Non-Plated Drill Size | ± 0.05mm |
| Drill Location Tolerance | ± 0.05mm |
| OutlineRouted Slots | ± 0.1mm |
| Line Width/Spacing | ±10% |
| Board Thickness | ±10% |
| Warp and Twist | 0.05% |
| Scoring/V-Cut | ± 5 degrees |
| Scoring Positional Tolerance | ± 0.1mm |
| Aspect Ratio | 10:01 |
Board Thickness:
| Number of Layers | Min. Thickness |
| 2 Layer | 0.1 mm |
| 4 Layer | 0.3 mm |
| 6 Layer | 0.5 mm |
| 8 Layer | 0.7 mm |
| 10 Layer | 1.2 mm |
| 12 Layer | 1.3 mm |
| 14 Layer | 1.5 mm |
| 16 Layer | 1.7 mm |
| 18 Layer | 1.8 mm |
| 20 Layer | 2.2 mm |
Quick Turn Lead Time:
| Number of Layers | Quick Turn Lead time |
| 2 Layer | 24 Hours |
| 4 Layer | 48 Hours |
| 6 Layer | 72 Hours |
| 8 Layer | 96 Hours |
| 10 Layer | 120 Hours |
| 12 Layer | 120 Hours |
| 14 Layer | 144 Hours |
| 16 Layer | Depend on Technical Specification |
| 18 Layer | Depend on Technical Specification |
| 20 Layer | Depend on Technical Specification |
FAQ:
Q1:What's your Aluminum board Thermal Conductivity?
A: Normally 0.8-3W/m.K. If you have special demands please feel
free contact us
Q2:Is my PCB file safe if I send it to you for manufacturing?
A: We respect customer's design authority and will never
manufacture PCB for someone else without your permission. NDA is
acceptable.
Q3:What is your testing policy and how you control the quality?
A: For sample, usually tested by flying probe; for PCB Volume over
3 square meters, usually tested by fixture, this will be more
faster. Due to there's many steps to PCB production, we usually do
inspection after every step.
Q4: What's your shipping way ?
A: 1. We have our own forwarder to ship goods by DHL, UPS, FEDEX,
TNT,EMS.
2. If you have your own forwarder, we can cooperate with them.
Q5: What is your certificate?
A: ISO9001:2008, ISO14001: 2004, UL, SGS,RoHS report.
Q6: What files should we offer?
A: If only need PCB, please provide Gerber File and manufacturing
specifications; If need PCBA,Please provide Gerber File,
Manufacturing specification, BOM list and Pick & Place/XY file.
Q7: Can I get a sample?
A: Yes, It's reasonable to get a sample to test our quality at
first.
Q8: Does ABIS CIRCUITS bevel gold fingers?
A: Yes. A standard 45-degree bevel, also bevel at 15 or 30 degrees
upon request. For multi-layer board, please ensure there is
adequate back set for the bevels.
Factory View:
Workshop:
Certifications:
Products We Made:
