Home Companies China World Technology Medical Equipment Service Group

Used Valleylab FORCE FX-C Electrosurgical Machine With Foot Paddle Negative Line Knife Head

Contact Us

[China]

Trade Verify

Address: TianHe District,GuangZhou,GuangDong

Contact name:Kiara

China World Technology Medical Equipment Service Group

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Used Valleylab FORCE FX-C Electrosurgical Machine With Foot Paddle Negative Line Knife Head

Country/Region	china
City & Province	guangzhou guangdong
Categories	Surgical Equipment

Product Details

Refurbished Valleylab FORCE FX-C Electrosurgical Machine With Foot Paddle , Negative Line , The Knife, Knife Head

Valleylab's Force FX-C Electrosurgical Generator is an isolated output electrosurgical generator that powers tissue cutting, drying and filling during bipolar and monopolar surgery.

The features are:

Instant response technology
Three bipolar modes: precise (low), standard (medium), and macro (macro-bipolar)
Three monopolar cut modes: Low, Pure and Mixed: Low, Pure and Mixed
Three monopolar induction modes: dry (low), fluoride chloride (medium), and spray (high)

Supports simultaneous solidification.
Dynamic system for monitoring contact quality during rapid eye movements in the laboratory

Supports ultrasonic electrosurgery of the nose with CUSA System 200 or CUSAEXcel and CUSA Handset with CUSA Electrosurgery Module (CEM)

Hand switch or foot switch activation

Recalls recently used modes and power settings

Adjustable volume of the activation tone
One RF enable port, RS-232 serial and expansion ports
Compatibility of mandatory GSU systems and mandatory argon systems.

The Valleylab Electrosurgical Generator, Patient Return Electrode, and active accessories are designed to work as a system. Valleylab offers a selection of patient return electrodes and electrosurgical instruments that are fully compatible with this generator. Customers considering patient return electrodes and/or active accessories from other manufacturers should request detailed instructions for use and warnings from the manufacturer.

Front Panel

Rear Panel

All specifications are nominal and subject to change without notice. A "typical" specification is within ± 20% of the declared value at ambient temperature (25°C / 77°F) and nominal input supply voltage.

Ouput Configuration	Isolated output
Cooling	Natural convection ,side and rear panel vents ,fan
Display	Eight digital seven-segment displays:1.9cm(0.75in) each
Mounting	(E8006, E8008 or UC8009), CUSAEXcel System, CUSA System 200 (with optional CUSA System 200 mounting bracket), Force GSU unit, Force Argon unit or any stable surface

Width	35.6cm(14inch)
Depth	45.7cm(18inch)
Height	11.1cm(43/8inch)
Weight	<8.2kg(<18lbs)

Operating parameters

Ambient temperature range	10° to 40°C (50° to 104°F)
Relative humidity	30% to 75%, non-condensing
AtmosPhilipiliperic pressure	700 to 1060 mbar
Warm-up Time	If shipping or storage is outside the operating temperature range, allow the generator to reach room temperature for one hour before use

transport and storage

Ambient temperature range	-40° to 70°C(-40° to 158°F)
Relative humidity	25% to 85%, non-condensing
AtmosPhilipiliperic pressure	500 to 1060 millibars
Duration of Storage	If stored for more than one year, the battery must be replaced and a full inspection completed, including calibration, before use. See the Force FX-C Electrosurgical Generator Repair Manual for instructions.

If you're interested in Refurbished Valleylab FORCE FX-C Electrosurgical Machine With Foot Paddle , Negative Line , The Knife, Knife Head ,feel free to contact us .Thank you .