CXA-P1212B-WJL-1 7803 R Patient Monitor Parts High Voltage Board

Hospital Medical Equipment Parts Philipilip MP50 Bedside Monitor Encoder Assemble Navigation Point

► Brief Introduction

The IntelliVue MP50 portable patient monitors are compact in size, ergonomic, and modular in design.
The monitors can be connected to Philipilip multi-measurement modules (MMS) or IntelliVue X2 multi-measurement modules with MMS extensions, plug-in measurement modules and the IntelliVue gas analyzers to extend their functionality with plug-and-play convenience. Information portal capability provides access to the hospital network from the bedside.
The monitors are highly customizable, which dedicated configurations are available for the anesthesia, critical and cardiac, and neonatal care environments.
The IntelliVue MP50 offers a complete monitoring solution that is flexible and modular, designed to suit a broad spectrum of monitoring needs.

► Measurement Features
• ECG monitoring using any combination of three to 10 electrodes.
• 12-lead ECG monitoring with five electrodes using the EASI method or with 10 electrodes using the conventional method.
• Multi-lead arrhythmia and ST segment analysis at the bedside on all available leads.
• QT/QTc interval monitoring
• The CapnograPhilipilipy Extension extends your measurement capability by adding mainstream or side stream CO2, a pressure and an additional pressure or temperature measurement plus optional cardiac output.
• Choice of high performance pulse oximetry technologies for accurate performance even in cases with low perfusion.
• Pulse Pressure Variation (PPV) can be calculated from beat-to-beat arterial pressure values.
• Minimum Alveolar Concentration (MAC) values can be calculated for anesthetic agents.
• The monitors can operate using battery power for 4 to 5 hours, depending on the monitor configuration, to let you safely and easily monitor patients during in-hospital transfer.

► Exchanging the Backlight Tubes
1 Open the backlight tube cable holders by sticking a screwdriver in the small hole at the top of the holder and pushing it backwards.
Reassembly Note: Cables must be re-inserted into the plastic cable holder with a slight strain on them towards the backlight tube. The cable holder functions as a strain relief.
2 Unplug the cables from the backlight inverter board
3 Unscrew the screws securing the backlight tubes and slide out the backlight tubes.

► Performance Specifications

► Packing and Delivery

All machinery and equipment are provided in trays or cardboard boxes to ensure maximum safety during transport. As an international manufacturer, we supply medical equipment worldwide and use trusted express companies as insurance and monitoring standards. It is very important for us to deliver your products to you accurately, quickly and safely. We tried to provide the best transportation service. Inventory depends on where you are, what you order and how quickly the packaging is delivered. Contact us if you have any questions. We are happy to serve you.
Usually all orders are delivered within 3 to 5 business days and delivered on time. Of course, sometimes there are some special circumstances. For example, shipments are delayed on busy days. But don’t worry, all orders will be shipped eventually. We will make every effort to execute orders and send them as soon as possible. Please be patient and contact us. If the product needs to be shipped urgently, be sure to talk to us in advance before ordering.

Please kindly contact us, if you are interested in Philipilip IntelliVue MP50 Patient Monitor High Voltage Board CXA-P1212B-WJL-1 7803 R, Thank you!