Philip Adult Finger Clip Spo2 Sensor 3.0M 130010105SA30Y-91 In Good Working Condition

Philip Adult Finger Clip Spo2 Sensor 3.0M 130010105SA30Y-91

Philip Adult Finger Clip Spo2 Sensor 3.0M 130010105SA30Y-91 In Good Working Condition

► Brief Introduction

The Philip Adult Finger Clip SpO2 Sensor 3.0M 130010105SA30Y-91 is a medical device used to measure a patient's oxygen saturation (SpO2) level and pulse rate. It's designed specifically for adult patients and typically used in healthcare settings such as hospitals, clinics, and doctor's offices. This particular sensor is a finger clip style, which means it attaches to the patient's fingertip to capture the necessary data. Overall, this device is part of the equipment used in pulse oximetry, a non-invasive method for monitoring a patient's oxygen saturation levels and pulse rate, which is crucial for assessing respiratory function and overall health status.

► Quick Details

► How to use

• Prepare the patient: Ensure that the patient's finger where the sensor will be attached is clean and dry. Remove any nail polish or dirt that may interfere with the sensor's readings.
• Turn on the monitoring device: Connect the sensor cable to the appropriate port on the pulse oximeter or monitoring device. Make sure the device is turned on and functioning properly.
• Attach the sensor: Open the finger clip sensor and gently place the patient's fingertip (usually the index or middle finger) into the clip. Ensure that the sensor fits snugly but not too tightly to avoid discomfort or restricted blood flow.
• Secure the sensor: Close the finger clip securely around the fingertip. Check to ensure that the sensor is properly positioned and not obstructed by clothing or other objects.
• Wait for readings: Once the sensor is in place, the monitoring device should start displaying the patient's oxygen saturation (SpO2) level and pulse rate. It may take a few seconds for the readings to stabilize, especially if the patient is moving or adjusting to the sensor.
• Monitor and record: Keep an eye on the SpO2 and pulse rate readings displayed on the monitoring device. Record the readings as needed for documentation and monitoring purposes.
• Remove the sensor: After use, gently remove the sensor from the patient's finger. Clean the sensor according to the manufacturer's instructions, if necessary, to maintain hygiene and functionality.
• Turn off the monitoring device: Once you've finished using the sensor, turn off the monitoring device and properly store the sensor in a clean, dry place for future use.

► Functional

Oxygen Saturation (SpO2) Measurement: The sensor utilizes a technology called pulse oximetry to measure the oxygen saturation level in the patient's blood. It does this by emitting light wavelengths through the patient's tissue and detecting the amount of light absorbed by oxygenated and deoxygenated hemoglobin. The SpO2 reading indicates the percentage of hemoglobin saturated with oxygen.

Pulse Rate Measurement: In addition to SpO2, the sensor also measures the patient's pulse rate. It detects variations in blood volume in the fingertip caused by the heartbeat and calculates the pulse rate based on these fluctuations.

Non-invasive Monitoring: One of the key advantages of this sensor is its non-invasive nature. Unlike invasive methods like arterial blood gas sampling, which requires puncturing an artery, pulse oximetry provides continuous monitoring without causing discomfort or risk of infection.

Patient Monitoring: The sensor is designed for use on adult patients in various healthcare settings, including hospitals, clinics, and home care environments. It enables healthcare providers to continuously monitor a patient's respiratory status and overall well-being, particularly in situations such as surgery, recovery, or during treatment for respiratory conditions.

Compatibility: The sensor is compatible with pulse oximeters and monitoring devices that accept this type of sensor connection. It features a 3.0-meter cable length, providing flexibility and ease of use during patient monitoring.

If you are interested in Philip Adult Finger Clip Spo2 Sensor 3.0M 130010105SA30Y-91.

If you have other questions about our products or services, please feel free to contact us. We are always ready to serve you.