Primedic M240 DM1 Defibrillator Rear Cover Casing

Metrax Primedic M240 DM1 Defibrillator Rear Cover Casing ,Impact-Resistant And Waterproof Material

►Quick Detail:

Primedic M240 DM1 Defibrillator Rear Cover Casing is suitable for Primedic M240 DM1 Defibrillator.The back shell of this machine is made of lightweight materials, making the machine easier to carry and move. The design of the back shell fully considers ergonomic principles to provide comfortable holding and carrying, reducing the discomfort of medical personnel when using it. The installation structure of the rear shell is simple, making it easy to assemble and disassemble the device.

The rear cover and front cover are closely interlocked to form a body shell, which is used to protect the machine well and allow the machine to be used normally. At the same time, when the machine accidentally slips to the ground, it can also protect the internal parts of the machine to avoid greater losses.
The applicable models of this product are marked on the back cover. This defibrillator is made in Germany. The version is 73076v 0106, the code is 0804, the AN is 73076, and the serial number is 007992. The product complies with the European unified standards and has obtained CE0123 Pass to prove that the quality of the product complies with European standards. The waterproof level of this product is waterproof level 1, which can prevent water droplets from infiltrating. Vertical falling water droplets will not cause damage to electrical appliances. IPX is an internationally accepted waterproof level certification system. It is used to mark the waterproof level of the product on many instruments and equipment such as outdoor and diving. It is the most common technical indicator. The ipx waterproof level is divided into 8 levels, from ipx-1 to ipx-8, and the waterproof ability increases in sequence.

The test conditions for IPX1 waterproof level are: the shell is placed on a turntable with a rotation speed of 1rmin/min, the eccentricity is approximately 100m, and the test equipment produces uniform water flow on the entire shell, with a water flow rate of 1+0.5 mm/min, test time is 10 minutes.

► Product advantages

Tips are marked on the back shell:

Current: 14,4VDC
1. Place the PRIMEDIC ACCU on this side.
2. Move the ACCU upward until you hear a locking sound.
3. PL defibrillator on charging console.
4. The yellow LED on the charging console shows that the ACCU is charging
5. ACCU replacement: Press the red button while pulling down the ACCU.

 ►features:

About delivery:

We default to express delivery by DHL,Fedex, We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.