Mindray BeneVision N1 Patient Monitor Parts Parameter Panel Board PN 050-002325-03

Mindray BeneVision N1 Patient Monitor Parameter Panel Board 050-002325-03

► Brief Introduction

Mindray BeneVision N1 Patient Monitor Parameter Panel Board is intended for monitoring, displaying, reviewing, storing , alarming, and transferring of multiple physiological parameters including ECG (3-lead, 5-lead, 6-lead or 12-lead selectable, Arrhythmia Detection, ST Segment Analysis, QT Analysis, and Heart Rate (HR)), Respiration (Resp), Temperature (Temp), Pulse Oxygen Saturation (SpO2), Pulse Rate (PR), Non-invasive Blood Pressure (NIBP), Invasive Blood Pressure (IBP), Pulmonary Artery Wedge Pressure (PAWP), Carbon Dioxide (CO2) and Oxygen (O2).

► Features

Power on the monitor: Locate the power button on the monitor and press it to turn on the device. Wait for the monitor to boot up completely.

Connect the patient: Attach the appropriate sensors and cables to the patient. This may include ECG electrodes, SpO2 sensor, blood pressure cuff, and so on. Make sure all the connections are secure.

Select patient parameters: On the Parameter Panel Board, you will see various parameter buttons corresponding to different patient measurements like ECG, SpO2, CO2, etc. Press the desired parameter button to view the measurements for that specific parameter.

Adjust settings: Use the knobs and buttons on the Parameter Panel Board to adjust the settings for each parameter. For example, you can use the arrow buttons to scroll through menus or change alarm thresholds. The exact controls may vary depending on the specific model of the monitor.

Monitor patient readings: After selecting the desired parameters and adjusting settings, you should start seeing the patient's readings displayed on the monitor. The readings may be in the form of waveform graphs, numerical values, and/or trend graphs.

Set alarms: If necessary, you can set alarms for abnormal readings. Press the alarm button on the panel and then adjust the thresholds or enable/disable specific alarms based on your requirements.

Monitor trends: The BeneVision N1 monitor also allows you to view trends of patient parameters over time. Press the trend button on the panel and use the arrow buttons to scroll through different parameter trends.

End monitoring: Once you have finished monitoring the patient, you can power off the monitor by pressing the power button again. Ensure that all patient connections are disconnected safely.

► Right View

► Delivery Issues

As a general rule, all the orders are going to be shipped within 3 to 5 working days and delivered on time. Of course sometimes there are some special circumstances. For instance, on busy days the shipment will be postponed. But no worries, all the orders will be dispatched finally. We will make great efforts to process the orders and ship them out as soon as possible. Please stay patient and keep in touch with us. If you need the product to be shipped urgently, please make sure you talk to us in advance before placing your orders. In order to make the deal runs successfully, please make it a point and manage your time of placing orders on the basis of your business needs. If you have any questions such as your order is taking much more time than expected or you need to know when will your order arrive, you can contact us at anytime. We will reply you as soon as possible. Your satisfaction is our biggest wish.

Please kindly contact us, if you are interested in Mindray BeneVision N1 Patient Monitor Parameter Panel Board 050-002325-03, Thank you!