Home Companies Ningbo Anyo Import & Export Co., Ltd.

DIP SPST Momentary Tact Switch 12x12 / Square Actuator For Medical Device

Contact Us

[China]

Trade Verify

Address: ROOM 2204, NO.98, TIANGAO ALLEY, SOUTH BUSINESS DISTRICT, YINZHOU, 315194, NINGBO, CHINA

Contact name:Roy Zhang

Ningbo Anyo Import & Export Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

DIP SPST Momentary Tact Switch 12x12 / Square Actuator For Medical Device

Country/Region china
City & Province ningbo zhejiang
Categories Integrated Circuits

Product Details

12*12mm DIP momentary tactile switch, square actuator SPST type

 

Description:

 

• Different heights are available

• Design 12*12mm

• Solder terminals

Tact switch is an on/off electronic switch that is only on when the button is pressed or if there is a definitive change in pressure. Another way to consider it, as momentary make or brake switch. As soon as a tact switches button is released, the circuit is broken.

You can choose between gold or silver contact material and you can choose from multiple cap options for certain models.

 

Application:

 

We offer multiple sizes, operating forces, actuator heights, and life cycles to meet the needs of your application. Our tact switches are used for human interface applications where the user applies force to the push button momentary switch for selection and control. Include telecommunications, consumer electronics, audio/visual, medical device, testing/instrumentation, computer peripherals and more.

 

Unique selling proposition:

 

• Reliable tactile feedback on input
• Simple assembly
• Long life time

 

Mechanical data:

Actuating force2.5±0.5N
Actuating travel0.25+0.1 / -0.1mm
End stop strength50N / 3S
Life time>100000 actuations

 

Soldering data:

Soldering methodsReflow
Solderability245℃ / 5 sec (IEC 60068-2-58 test td)
Resistance to soldering heat260℃ / 10 sec (IEC 60068-2-58 test td)
 

Soldering condition:

ItemCondition
Preheat temperature110℃ max (Embilomental temperature of soldering surface of P. W. E)
Preheat time60 sec. max
Area of flux1/2 max of P. W. B. thickness
Temperature of solder255℃ max
Time of immersionWithin 5 sec.
Soldering numberWithin 2 times (But should bring down heat of the first soldering)
Printed wiring boardSingle sided copper-clad laminates

 

Notes:

1. After switches were soldered, please be careful not to clean switches with solvent
2. In the case of using soldering iron, soldering conditions shall be 280℃ max and 3 sec. max
3. Right after switches were soldered; please be careful not to load on the knobs of switches.
3. 2 Design instructions: Follow recommended P. W. B. piercing plan.
3. 3 Others
1) Please be cautious not to give excessive static load or shock to switches.
2) Please be careful not to pile up P. W. B. after switches were soldered.
3) Preservation under high temperature and high humidity or corrosive gas should be avoided especially. When you need to preserve for a long period, do not open the carton.
4) Panasert RH and RH6 shall be used as the standard insert machine (use N type clinch).
5) Preservation under high temperature and high humidity or corrosive gas should be avoided especially, when you need to preserve for a long period, do not open the carton.

 

Dimension:


 

L4.34.555.566.5
77.588.599.510
10.51111.51212.51313.5
14151617181920
212223212526-30mm

 

Hot Products

26mm Band Selector Rotary Switch, 1 pole 12 position with 6mm shaft Description: A rotary switch is ...
Φ17mm Single Turn Carbon Film Rotary Potentiometer With Switch RV17-K2 Application: Ideal for ...
Φ24mm adjustable resistance dimmer with switch potentiometer WH138-1 Application: Ideal for ...
Pin type WH138-4 potentiometer with switch dimmer switch speed controller Application: Ideal for ...
Box Type Non-Inductively Metallized Polyester Film Capacitor CL21X-B Description: Film capacitors ...
1.27mm Pitch 3mm Height Single Row SMT Type Pin Header With Post Description: Pin header is a form ...