|
[China]
Trade Verify
Address: No. 5-37, Fengxi 2nd Road, Hailong Street, Liwan District, Guangzhou, China
Contact name:Buffy
Guangdong Bunge Building Material Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
Banquet Hall Soundproof Operable Walls/Classroom Sliding Partition
Walls
The details of sliding partition walls
The sliding partition walls category
1.Single-style - The screen adopts two-wheel suspension, and each
screen can be operated independently. It has a high degree of
flexibility, can be turned, can be stored in any position, and can
be combined into multiple moving spaces.
2. Two-piece type - The screen adopts a single wheel central
suspension, and every two screens are hinged together at the rail
to push and pull, can be folded, but can not be turned, suitable
for quick installation, usually hidden on the main track The end.
The type of sliding partition walls
1. Ordinary board - The simplest screen, only has the up and down
support function.
2. Telescopic plate - The necessary head plate for each group of
screens, with telescopic function and up and down bracing function,
used to compress and seal the entire group of screens.
3. The door in the door - has a screen center to open the door
function and up and down support function.
4.Plastic rubber sheet - The necessary tail plate for each group of
screens, with up and down support function, flexible soft rubber on
the side of the plate, used for soft contact with the wall.
The model of sliding partition walls
1. 65 mm - Screen thickness 70mm, only applicable to heights up to
4 meters.
2. 85 mm - screen thickness 85mm, can apply to 8 meters below the
height.
3. 100 mm - screen thickness 100mm, can be applied to 10 meters
below the height.
The details of installing the sliding partition walls
(1)Size of wall: all the folding partition wall panels should be
installed in accordance with the manufacturers recommendations.
(2)Cutting: all necessary hardware and accessories for a complete
job installation are to be furnished by the contractor.
(3)Install the acoustic panels: the installation of acoustic panels
should be carried out in a sequence from the left to the right,
from upside to downside, the panels are cut to fit on site,
traditional woodworking tools are suitable for cutting the panels,
if panels are cut using a fine tooth table saw the panels should be
cut face up to avoid scratching and at a much slower speed to avoid
any tearout or chipping.
(4)Fix on keel:
Wooden keel fixing using nails, staples or screws into prefixed
timber battens on the walls via the tongue and groove joint.It also
can fixing by: light steel keel.
| Description of the whole system | |
| Item | movable partition systems |
| Partition Height | 2-17 meters |
| Sound Transmission Class(STC) | 32-55db |
| Description of accessories | |
| Roller | Imported dupont POM material roller,bearing capacity 225-1300kg |
| Track System | Clear anodized 6063-T6 aluminum double track |
| Surface finish option | MDF,plywood, melamine,HPL,fabric,PU,wood veer, mirror steel ect. |
| Junction | "T"junction, "L" juntion, cross/ "X" juntion |
The features of sliding partition walls
1. It can divide the space arbitrarily along the track, smoothly
passing through various turning points, flexible use of space
2. Durable aluminum outer frame, together with fire-resistant,
sound-proof material, make it more prominent fire, sound insulation
performance
3. Full range of partition type, can be used for different
requirements of the site
4. When the sliding partition wall is in motion, the ceiling
suspension system is stressed, and the ground is not laid on the
ground rails to promote lightness and noise.
5. When the sliding partition walls are combined in the vertical
and horizontal directions, they have fully taken into account the
blocked sound wave propagation path and the use of soft sealing
materials to make the sound insulation performance more pronounced.
6. Hidden handle operating mechanism, smooth partition wall line
type, simple and reliable mechanical seal device, so that its
quality is fully improved.
7. According to the needs of the scene to add a single open or open
the partition wall door, improve the space utilization efficiency,
the small door with a self-locking mechanism, also makes the sound
wave can not spread
8. The top and bottom of the partition wall is equipped with an
operating clearance of 20 to 30 mm, which can be adapted to the
slight slope of the building surface.
9. The sliding partition wall terminal has a 100 mm operating
clearance, which can be adapted to slight errors in the combination
of building wall and partition wall.
10. The thickness of the 3mm decorative surface has been reserved
on the surface of the partition to make its later decoration
process more convenient and seamless with the frame.
