Guangdong Bunge Building Material Industrial Co., Ltd |
Verified Suppliers
|
|
Technical information:
Series | BG65 | BG85 | BG100 |
Panel suspension | Top hung only | Top hung only | Top hung only |
Panel thickness | 65 mm | 85 mm | 100 mm |
Max height | 4000 mm | 6000 mm | 18000 mm |
Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
Face material | 9 mm | 9 mm | 12 mm |
Pass doors | Single door or Double door | ||
Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather, Insulation board, Fireproof board, Wall paper, Vinyl, Painting, etc. (Customized) |
Feature:
The activity partition is a separation tool for general space. In real life, places that require the use of active partitions are everywhere. The active partition allows us to make better use of the limited space and greatly increase the space utilization rate. The active partition has the following obvious features:
1. The activity partition has a good sound insulation effect and is
called active sound insulation wall. It is a good choice for office
decoration, hotel decoration restaurant banquet hall, and partition
room activity partition.
2. When the activity is cut off, its main frame adopts standard T6
anode aluminum, which is not easily deformed, corroded or has
spots, but its weight is relatively light. On the two sides of the
movable partition panel, we can apply wallpaper, cover cloth (soft
pack), stick solid wood thread or other things on the panel. The
decorative surface of the movable partition can be varied.
3. In the interior of the activity partition, the whole screen is
fixed with solid wood strips, so that the active partition door
panel is stable without being bulky; the upper and lower telescopic
mechanisms are installed so that the pressure strips at the upper
and lower ends of the movable partition can be freely retracted to
achieve the effect of fixed partition and sound insulation. In
addition, in order to further enhance the soundproofing effect of
the partition, the interior of the partition is filled with
fiberglass insulation wool.
4. It is simple and quick to install the activity partition. In the
earlier period, we only needed to weld steel structures on the
ceiling of the ceiling slab to connect aluminum alloy rails without
any need for rails. There is a small section of track in the track
that can be removed at any time. We call it the "original track."
When we want to hang the door to the partition, we only need to
dismantle it, hang the door up, and then slightly adjust it. It can
be used normally.
5. The parts used in the production of production partitions are
not easily damaged. The active partition has the remarkable feature
of long service life.
Installing details:
1.In the case of a fixed hanging rail, the track of the hanging rail shall be fixed with wooden screws first on the wooden edge of the partition wall, and then according to the installation requirements of the active partition, the guide rail shall be installed on the ground according to the design requirements. The guide rails are mounted on the edge of the wood and the opening of the rail is reserved near the edge of the wall.
2.When installing partitions for movable partitions, determine the
exact sliding position of the suspending wheels according to the
needs of the installation. Fix the pulleys on the top of the wooden
edge and the movable partition, and install the partitioning fan to
the fixed position on the hanging rails. Then perform the final
fixing process for each page of the cut-off activity.
3.All the basic processes are completed when the decorative surface
can be designed and decorated, according to the needs of the
installation can be soft and hard package, you can also do retro
decorative fabric, you can also use high-grade wood decoration, The
active partition can be decorated with different processes
according to the different needs of the design.
4.Using the principle of positioning the elastic wire, the process of the first line is first carried out. Firstly, according to the planning of the construction plan, the position of the movable wooden partition is placed on the indoor floor, and then the position line of the movable partition is pulled to the side of the wall or ceiling.
5.Reliable Walls in Guangzhou Partition Walls Use similar methods
of wood walls to do wall partitions for partitions, punch holes in
the walls and nail edges, install wood dragons' skeletons and
install ceilings, and install design drawings. The need for a cross
rail device for hanging rails is to install the rails for the
active partition.
6. According to the needs of the design drawings and the
combination of the actual site, measure the height and width
dimensions of the active partition wall, confirm the height and
width dimensions of each block of the active partition when the
installation channel of the hanging track is confirmed, and draw a
processing door to develop a partition door.
Application:
Hotel on the hanging rail activities partition products on the hotel hanging rails off the general framework of the aluminum frame material processing and production, internal partition expansion board, suitable for high-end hotel private rooms, banquet halls, conference rooms, showrooms, mufti-function Hall and so on. The sliding door base board is a MDF board or glass magnesium board. The decorative surface can be leather (cloth art) hard bag, soft bag, wallpaper, color steel veneer, hollow veneer and so on.