|
[China]
Trade Verify
Address: No. 5-37, Fengxi 2nd Road, Hailong Street, Liwan District, Guangzhou, China
Contact name:Buffy
Guangdong Bunge Building Material Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
Polyester fiber acoustic panel has good performance: eco-friendly,
fire-resistance, heat insulation, moisture-proof, environment
protection, mildew proof, easy cutting, easy removal, simple
installation, decoration, lightweight, easy machining, stability,
impact resistance, easy maintenance etc.
Polyester fibers acoustic panel is suitable for walls and ceiling
installation. Many patterns and colors are available to meet
different levels of acoustic styles and decorative requirements.
| Material | 100% polyester fiber |
| Surface | Rough/Smooth |
| Recycle | Environment Friendly / Recyclable |
| Fire Retardent | Grade B1 |
| Clean-ability | Clean with vacuum, soft brush to remove residue |
| Size | 1220mm*2420mm |
| Thickness | 9mm (We can do from 3mm to 15mm according to your exact need) |
| Special product character | We are the only factory that could make both sides of the panel surface smooth. |
1. Sound absorption property
Polyester fiber panel's sound absorption coefficient increases with
the sound frequency. The sound absorption coefficient can reach
0.8~1.1. It is a sound deadening material of high performance.
2. Physical property
Polyester fiber panel is sound-absorbing, thermal-insulating,
elastic, wear-resistant, impact-resistant, and hard to tear.
3. Security property
Thanks to its excellent physical property, polyester fiber acoustic
panel has no risk of falling and hurting people. Tested by National
Research Center of Testing Techniques for Building Materials, PET
acoustic panel's formaldehyde release quantity is 0.1 and complies
with the E1 grade requirements of GB18580-2001 standard.
4.Decorative property
Polyester fiber panel has excellent decorative effect. We offer
more than 20 colors for your choices. You can also cut the panel
into any shape in your favor.
Disposal of the baseboard:
a.)Baseboard without holes:use glue paper to cover the joint gap
b.)Baseboard with holes:use the thin plastic film to close the
holes
The substrate surface should be smooth. If you need to do cavity
installation, the substrate may be perforated or using wood . To
enhance sound-absorbing effect, the cavity can also be filled with
sound-absorbing cotton.
Special note: When the substrate is gypsum board, cement board, block board or calcium silicate board, the substrate joint must be sealed with cloth and joint sealant to avoid air leakage.
Polyester acoustic panel which is open cell structure can absorb the glue easily, spread the glue (single surface spread)only on the wall (pls spread more than usual).Use the grain nail to fasten the board.
It is widely used for floors, walls and ceilings in many areas such as music halls, theaters, recording studios, television studios, conference rooms, gymnasiums, exhibition halls, hotels, home theaters,disco, KTV, rehearsal rooms.Any space where need sound absorption need this product.
