5 Million Times Steady Inductive Parking Barrier Gates Durable
Intelligent barrier gate
Torque motor,steady,low noise,5 million times
100% duty cycle,heavy duty
Intelligent barrier gate provides a secure and convenient solution
of stopping unauthorized vehicle or giving access to authorized
vehicle at highway,shopping center, exhibition center, hospitals,
1) This car park barrier provides open/close time: 0.6s / 1s / 1.8s
/ 4s / 6 sec. optional
2) Straight arm with rubber bar, Max.length following:
6m for 6 sec. & with anti-collision
6m for 4 sec. & with anti-collision
4.5m for 3 sec. & with anti-collision
3m for 1.8 sec. & with anti-collision
3m for 1 sec.& with anti-collision
2.5 m for 0.6 sec with anti-collision
3) Inclusive of arm and "push button" which opens/closes barrier
4) Exclusive of LED light bar,remoter, boom bracket and
anti-collision mechanism: need to buy extrally
5) Optional housing color as yellow (default),orange, white, red
6) Optional boom arm direction as leftward or rightward
1.Simple structure, easy installation & maintenanceTorque
motor,steady,low noise,free maintenance
2.2mm cold-rolled plate heavy duty case with IP54 protecion
Anti-collision protects boom arm
3.Simple structure, easy installation & maintenance2 holes on
the bottom of door for rain drain
Control via remoter,push button or PC
Intelligent Barrier Gate Features
0.6 second fastestaction and 100% duty cycle operation with 5
million MTBF for toll gate
Free-maintenance torque motor ensures100% duty cycle operation with
5 million MTBF and 0.6 second fastest open/close time for toll gate
and parking lots wth high traffic flow.
Easy installation and maintenance reduces your labor cost
Simple structure and no limit switch design ensures easy
installation and maintenance which reduces your labor cost
Heavy-duty and simple-design housing
The housing adopts 2mm precise machining cold-rolled plate and
static electricity sprayed anti-UV surface which is non-scale and
unfading in 5 years, conformed to the IP54 dustproof and
waterproof, Simple design also decorates your premises
System automatically self-checks operation status and reports
System always automatically self-checks operation status and
reports errors shown on the LED tube of the controller.
Sine lever drive mechanism ensures smooth landing of boom without
The patented precise casting Sine lever drive mechanism enables the
boom arm moves from slow to fast when it starts, and fast to slow
when it stops. This will effectively reduce the shaking of the boom
arm and allay the burden of the electrical motor, so that the
lifetime of the motor and mechanical components will be greatly
Anti-collision protects boom arm (optional)
Anti-collision mechanism will protects the boom arm not to be
damaged once boom arm was collided by a vehicle.
Safety--- Anti-hit by pressure resistance bounce
While moving down,arm will immediately go back to vertical position
once it is obstructed by an imposed force, which protects the
vehicle or person not to be hit by boom arm. The sensitivity is
Safety--- Anti-hit by Loop Detector (Optional)
While barrier boom moving down, If a coming vehicle was detected to
be existing on the ground induction coil, the arm will go back to
vertical position immediately until loop input was dismissed and
then the arm will go down immediately.
Safety--- Anti-hit by IR photocell (Optional)
While arm moving down, If infrared transportation between
transmitter and receiver is blocked by human or vehicle, the arm
will go back to vertical position immediately. The arm will
automatically close once the infrared transportation recovers.
Safety--- Anti-hit by “Opening Priority”
If a vehicle is coming while arm moving down, the arm will
immediately go back to vertical position once a open command is
given, which protect the vehicle not to be hit by arm.
While arm moving up, the arm will immediately go down once a close
command is given
Automatically close after the given time
Once this function is set “ON”, the barrier will automatically
close after given time (1-90 seconds adjustable) if there is no
vehicle passed after barrier open.
Automatically Close by loop detector (Optional)
If loop detector is installed, after vehicle passed the barrier
will automatically close once the loop input was triggered
Automatically open by loop detector (Optional)
If loop detector is installed, when barrier boom is in horizontal
position, the barrier boom will go up immediately once the loop
input was triggered
Manually control in case of no power
Once power is off, just open the cabinet and manually control the
barrier by a gear mechanism. Also barrier boom can be manually
locked in any position between horizontal and vertical, the lock
status will remain until unlock manually.
Boom to open up fully or close down in case of power failure
If power is suddenly off while boom closing, boom will
automatically close down fully if the angle between boom and
vertical plane beyond 45 degree. If power failure occurs during
boom opening, boom will automatically continue to open up fully if
the angle between boom and level surface beyond 45 degrees.
Anti-condensation in cold climate
The barrier remains low power consumption even without closing and
opening input, which will keep the motor in normal temperature. The
lubricant will not be frozen so that the barrier will keep working
in frozen environment
Transparent plastic covers on Control Board
A transparent plastic covers on the Control Board to makes Control
Board water proof and dust proof, also protects operaton
|Voltage||220V±10%, 110V±10%, 50/60HZ|
|Remote control distance||≥30m|
|Max boom length||6 meters|
|Motor Rotational speed||1400rmp|
Why choose us?
1.One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltae.
3. The surfaces of the system destroyed by wrong installation our
4. Broken by natural disaster.
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and service
article belong to the production factory.
Communication with customers
1) Q: Connected power and press open/close button but traffic
barrier gate no action?
|1||Fuse blown||Check fuse and power in controller|
|2||Battery of remote control powered off||Change a new one|
|3||External protection circuit break or at protecting status||Open the barrier door and click OPEN/CLOSE button on control box|
|4||Same frequency interference||Check photocell and loop detector|
2) Q:Connected power and press open/close button,traffic barrier
gate will move but even when it is at right position, the motor
still running and not stop?
|1||Limit switch||Adjust the horizontal/vertical limit switch to correct position|
|2||Main controller failure||Change a new one|
3) Q: Motor running but traffic barrier gate arm no action?
|1||Barrier arm at 45° position where is hard to move||Unlock clutch and manually rotate arm to horizontal or vertical
position then try again|
|2||Tension of balancing spring not suitable||Adjust spring exactly|
|3||Low working voltage||Check the voltage and power|
4) Q: When opening/closing,traffic barrier gate arm cannot reach
right position (90° vertical & 180° horizontal)?
|1||Length adjustment of connecting rod not correct||Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at
180° horizontal position if master rod and slave one are in the same
|2||Nuts on the limit switch loose|
Tighten the nuts when arm at 90° vertical and 180° horizontal