Shanghai Printyoung International Industry Co.,Ltd |
Verified Suppliers
|
|
Paper Sheet Cutting Machine , a4 Paper Cutting Machine Automatic
Specifications :
Parameter | Unit | 78 | 92 | 115 | 130 |
Cutting width | CM | 78 | 92 | 115 | 130 |
Max.cutting height without assistance pressing plate | CM | 13 | 13 | 16.5 | 13 |
Max.cutting depth | CM | 78 | 93 | 115 | 130 |
Min cutting depth without assistance pressing plate | CM | 2.5 | 2.5 | 3 | 3 |
Extended length of working table | CM | 64 | 65 | 73 | 73 |
Height of working table | CM | 86 | 86 | 89 | 86 |
Machine width including side working table | CM | 215 | 233 | 266 | 266 |
Total length of working table | CM | 178 | 198 | 226 | 241 |
Cutting speed | R/MIN | 45 | 45 | 45 | 45 |
Manx. Paper pressure | N | 30000 | 35000 | 40000 | 40000 |
Power of main motor | KW | 3 | 3 | 4 | 4 |
Motor for paper feeding | KW | 0.75 | 0.75 | 0.75 | 0.75 |
Air pump | KW | 0.55 | 0.55 | 0.75 | 0.75 |
Machine weight | KG | 2500 | 2700 | 4000 | 3900 |
Overall dimension | CM | 210*140*195 | 225*140*195 | 255*160*215 | 260*153*195 |
Parameter | Unit | 137 | 155 | 166 | 186 |
Cutting width | CM | 137 | 155 | 166 | 186 |
Max.cutting height without assistance pressing plate | CM | 16.5 | 16.5 | 16.5 | 16.5 |
Max.cutting depth | CM | 145 | 155 | 166 | 195 |
Min cutting depth without assistance pressing plate | CM | 3 | 3 | 3 | 3 |
Extended length of working table | CM | 74 | 75 | 75 | 75 |
Height of working table | CM | 91 | 90 | 90 | 90 |
Machine width including side working table | CM | 287 | 314 | 322 | 375 |
Total length of working table | CM | 259 | 280 | 283 | 355 |
Cutting speed | R/MIN | 45 | 42 | 42 | 40 |
Manx. Paper pressure | N | 45000 | 55000 | 60000 | 65000 |
Power of main motor | KW | 4 | 5.5 | 5.5 | 7.5 |
Motor for paper feeding | KW | 1 | 1 | 1 | 1 |
Air pump | KW | 0.75*2 | 0.75*2 | 0.75*2 | 0.75*2 |
Machine weight | KG | 4500 | 5200 | 550 | 6800 |
Overall dimension | CM | 280*160*215 | 296*165*215 | 315*160*215 | 340*182*230 |
Introduction:
Paul new high-speed cutter, the wait is expected figures in
Japan to exchange control system, 10.4-inch color LCD display. Data
resolution of 0.01mm, and fault diagnosis capabilities of
self-functioning model shows that 100 program group, more than
10,000 cut at different positions, dynamic display of cutting and
running, dynamic tracking, the maximum speed of pushing paper 5-18
m / min, a more powerful computer operating system may be memory,
storage, memory storage time of up to 300,000 hours above, and
self-maintenance of the operating system. Italy selected hydraulic
components, Germany, Japan, Korea Electric components, Taiwan ball
screw, linear rail, and fitted with safety overload cut switch,
safety lock pressure paper container, electrical configuration for
the programmable logic controller PLC to all electrical, mechanical
implementation of monitoring, the use of imported low-maintenance
bearings.
Main features:
A. Ball lead screw and linear guide-rail makes paper impeller
run smooth,low noise,accurate positioning,enhance the cutting
precision and speed greatly,prolong the service lift of paper
cutter.
B. The working tables are all chrome-plated and equipped with
air balls which makes paper-pushing easily and rusty-proof.Large
side workingtable(1000*800) is optional.
C. IR photoelectric protection,buttons by two hands safety devices.
D. Safety device for knife bed, overloading protection for
cutting,automatic return safety device.
E. Imported hydraulic components are adopted in hydraulic
system,the pressure can be adjusted.The paper is pressed twice by
pressure-increased system.
F. Mechanical assistance device for knife replacement makes
knife replaced quickly and safely.
G. Equipped with the optical knife alignment to make cutting
more convenient.
H. PLC control system.
I. Ejecting device for knife bar.
J. Flat worm speed reducer transmission.
K. Inside electronic knife locker to make the cutting more
safety and stable.
L. Multination langueage operation interface.
M. Carry on the block programming operation through the
figures and diagrams operation manual.
N. Safety device for overloading cutting.
O. Safety locker of press bar.