|
[China]
Trade Verify
Address: Room 27B, NO,58 New Jinqiao Road, Pudong, Shanghai, China 201206
Contact name:Caren
Shanghai Printyoung International Industry Co.,Ltd |
|
Verified Suppliers
|
|
|
Full Hydraulic Automatic Paper Cutting Machine Program Control
Specifications :
Model | Unit | 67ET | 67EF |
Cutting width | CM | 67 | 67 |
Max.cutting height without assistance pressing plate | CM | 8 | 8 |
Max.cutting depth | CM | 67 | 67 |
Min cutting depth without assistance pressing plate | CM | 2 | 2 |
Extended length of working table | CM | 53 | 65 |
Height of working table | CM | 88.2 | 88.2 |
Machine width including side working table | CM | 125 | 153 |
Total length of working table | CM | 150 | 162 |
Cutting speed | R/MIN | 20 | 20 |
Manx. Paper pressure | N | 20000 | 20000 |
Power of main motor | KW | 1.5 | 1.5 |
Motor for paper feeding | KW | 0.37 | 0.37 |
Air pump | KW | / | 0.25 |
Machine weight | KG | 650 | 720 |
Overall dimension (L*W*H) | CM | 173*145*165 | 185*173*165 |
Blade specifications (L*W*H) | CM | 78*10.3*1.0 | 78*10.3*1.0 |
Introduction:
67EF paper cutter is the cutting equipment necessary for high-end
digital printing and Graphic Express Printing Center.The knife and
clamp bar is controlled by hydraulic cylinder,the fully hydraulic
transmission make machine more safe and the imported hydraulic
ensure the system stabillity.It has the benchmark setting,save and
self-diagnostic function.The widen working table are all
chrome-plated with air ball;imported IR photoelectric
protection,button by two hands safety devices; precise guide of
paper impeller,aiming at back paper stopper with high angle
precision.7 inches colorful touching screen,driven by imported
servo motor,the resolution rate is 0.01mm,it has self-diagnostic
function of troubles and displays the operating pattern,100 program
units,over than 10000 different cutting position,dynamic follow-up.
The max paper-pushing is 5-10m/min.It adopt imported hydraulic
components,Janpan,Kotea electric components,imported bearing of low
maintenance.
67ET paper cutter is the cutting equipment necessary for high-end
digital printing and Graphic Express Printing Center.The knife and
clamp bar is controlled by hydraulic cylinder,the fully hydraulic
transmission make machine more safe and the imported hydraulic
ensure the system stabillity.It has the benchmark setting,save and
self-diagnostic function.It adopt IR photoelectric
protection,button by two hands safety devices; precise guide of
paper impeller,aiming at back paper stopper with high angle
precision.7 inches colorful touching screen,driven by
imported servo motor,the resolution rate is 0.01mm,it has
self-diagnostic function of troubles and displays the operating
pattern,100 program units,over than 10000 different cutting
position,dynamic follow-up.The max paper-pushing is 5-10m/min.It
adopt imported hydraulic components,Janpan,Kotea electric
components,imported bearing of low maintenance.
Main features:
. The machine body and slotless working table casting by resin sand
. Imported ball lead screw,linear guide rail and slotless working
table technology
. Chrome-plated working table
. Whole hydraulic system
. Safety IR sensor protection device
. German technical hydraulic system
. Original imported hydraulic pumps and valves
. Paper feeding by servo system
. Adopt imported computer program system
