YIWU YUXING IMPORT AND EXPORT FIRM |
Verified Suppliers
|
|
High Wear-Resistant Stainless Steel Conical Refiner Plates Rotor Stator Used In Different Kinds Of Pulp Making
Model | Plate diameter(mm) | Capacity(t/d) | conical degree | Motor(Kw) |
ZM19 | Φ460 | 30-150 | 40° | 200-315 |
ZM24 | Φ600 | 50-250 | 40° | 355-500 |
ZM30 | Φ750 | 80-400 | 40° | 560-900 |
It can homogenize (split, broom) and improve beating degree of all
kinds of pulp (including wood pulp, cotton pulp and pulp), so that
it has the characteristics required by paper machine production and
can produce paper and paperboard meeting the quality requirements.
The utility model can be used by a single set or by multiple sets
in series and parallel.
The machine is mainly composed of base, front cover, housing,
moving gear cutter head, stationary gear cutter head, cutter feed
mechanism, rotor and operation box. The front cover, housing,
moving gear cutter head and stationary cutter head constitute the
slurry grinding chamber. The slurry is pumped into the grinding
chamber from the slurry inlet of the front cover. Before entering
the rotary cutter head and the stationary cutter head for slurry
grinding, the unclean impurities are pulled down to the desander
box under the action of gravity. The rotating cutter head rotates
under the drive of the motor to make the slurry produce centrifugal
force and enter the grinding area composed of the rotating cutter
head and the stationary cutter head. Under the action of the cutter
teeth, the slurry fiber is cut off, divided, broomed, twisted and
crushed to produce qualified slurry. Compared with the double disc
mill, its remarkable features are as follows:
A. It is easier to maintain and replace the grinding disc;
B Low power consumption during no-load operation;
C The fiber quality is high due to long refining area and long
retention time of pulp in the grinding area;
D Good cone contact and high efficiency;
E. A desander box is provided to clean the slurry and reduce
improper damage of the cutter head.