High Power Ultrasonic Automatic Paper Cup Machine

High Power Ultrasonic Automatic Paper Cup Machine

Quick Detail

JBZ-S12 Main Technical Data:

1. Paper Cup Sizes: 3,4,5,6.5,8,9,10.5,12 OZ or other sizes

2. Row material: Single side(one side) or Double Sides PE(polyethylene) film coated paper

3. Suitable paper weight: 170gsm--420 gsm (Recommend 190--320 gsm)

4. Speed of making paper cups: 45--55 pcs per minute

5. Limit of temperature control: 0--400 Centigrade

6. Total power: 5.5KW

7. Power source: 380 V,220V 50 Hz,60 Hz or other Customer needed

8. Whole machine weight: 1500 kg

9. Appearance size(L x W x H): 2650 * 1300 * 1700 mm

10. Note: We can make the paper cup machine suitable for your requirement.

Specification:

1. Automatic control adopts optically controlled non-contact switch,

2. Micro-controlled transducer,

3. Step-less speed adjustment,

4. Paper Cup-fan-wall body sealed by Ultrasonic System,

5. Paper Cup bottom sealed by heater.

6. Full automatic,

7. Easy changing molds produce different sizes paper cups,

8. Easy operating by operator (one operator is enough),

9. Easy maintenance with minimum cost,

10. Cheap operating cost and low investment,

11. Amelioration: Air compressor aren't required for this type paper cup machine when the paper weight under 300gsm.

After service

1 The CD and service&support guide booklet will be sent with machine to guide the installation process works,adjust the whole machine,production,avoid or solve the problem which the buyer will face.

2. Test run of the machine&training:

We will adjust the machine well for one week before the delivery, ensure the machine has the perfect performance.

3. We can dispatch technologists to buyer’s factory,guiding installation,adjustment for a period,the buyer in charge of the salary, traffic fee, boarding and lodging, communication.

4. We supply the consumable spare parts for free for two years use

Paper Cups Name :

1. Name against the material: Single side PE coated paper cups, double sides PE coated paper cups
2. Name against the size : 3oz, 4oz, 5oz, 6oz, 7oz, 8oz, 9oz, 12oz, 16oz, 18oz, 22oz, 24oz, 32oz, ... etc. {OZ : Ounce . It is a weight unit. 1oz = 28.34 g , that means 1oz equal 28.34 ml water weight(1oz cup capacity is 28.34ml).}
   WE name 3--18oz paper cup, 20--60oz paper bowl , 60---200oz paper bucket , Also Higher Paper Cup (cup higher than 130mm, but the bottom is under 75mm)
3. Name against the usage : Hot drinks cup(coffee cup, tea cup) ; Cold drinks cup(coca-cola cup, beer cup ), Ice-cream cup ;
4. Remark : for hot drinks and ice-cream can use single PE cup and double PE cup ; for cold drinks best use double PE cup,

The material which progress paper cups

1. The Material : Single(one) Side PE Coated Paper , Double(two) Sides PE Coated Paper .
2. PE coated : Polyethylene film coated
3. Single side PE coated paper : only one side of the paper coated with PE film (appearance: inside of the cup is smooth and bright)
4. Double Sides PE Coated Paper : Both of the two sides are coated with PE film (both of the cup sides are smooth)
5. Paper Weight : Unit gsm, gram per square meter . 200 gsm paper mean 1 square meter paper weigh 200 gram.
6. PE Coating Weight : 1 square meter coated PE film weight, 12---24 gsm,
7. PE Coated Paper Weight : single side PE coated paper weight (raw paper weight + PE coating weight) ; Double sides PE coated paper weight (inside PE coating weight + paper weight + outside PE coating weight)

Progress Paper Cup In Machine:

1, Feed the pre-printed and pre-cutted cup-fan-wall sheet papet to the entrance ; The same time feed the rolling cup-bottom paper

2, The cup-fan-wall paper is sealed on the cup-side-sealing mold >>>become cone shape ; The cup-bottom auto punching(cutting) in the machine

3, Insert the bottom-round piece to the cone-cup-side ;

4, After pre-heating, main heating, then the cup-bottom curling ;

5, Knurling Cup-bottom Step : Knurling the bottom-round-piece paper to the cup-cone-side ;

6, Curling cup-top step : curling the cup top to circular shape;

7, Discharge and transfer the finished cups to the collection;

8, Package the finished paper cups in plactic bag or other hermetic bags to protect the cup top shape from becoming ugly or breached

9, Package the plastic bags in a cardboard box....

10, Note: the process of making paper bowls,paper buckets are the same as making paper cups.

Work Shop: