Active Member
|
[China]
Address: 1-1 No.600,TongJiang Zhong Road,ChangZhou,JiangSu,china
Contact name:gong
ChangZhou Polisen Plastics Technology Co., Ltd. |
|
|
Specifications:
It can be customized high rigidity, high toughness and a variety of heat-resistant glass fiber content of the material according to customer requirements, and can choose a variety of colors.
Description:
Trademark | 01010G | 01020G | 01030G | 01040G | ||
Item | Unit | Test Methods | GF10 | GF20 | GF30 | GF40 |
Performance |
| |||||
Density | g/cm3 | ISO 1183 | 1.18 | 1.27 | 1.36 | 1.45 |
Glass fiber content | % | ISO 3451-4 | 10± 1 | 20± 1.5 | 30± 2 | 40± 2 |
Melt Index 230/2.16 | g/10min | ISO 1133 | 15±1 | 12±1 | 10±1 | 8±1 |
Moisture content | % |
| ≤ 0.5 | ≤ 0.5 | ≤ 0.5 | ≤ 0.5 |
Shrinkage | % | ISO 294-4 | 0.5-1.0 | 0.4-0.8 | 0.35-0.7 | 0.3-0.5 |
Mechanical behavior |
|
|
|
|
|
|
Tensile Strength | MPa | ISO 527 | 105 | 115 | 150 | 170 |
Elongation at break | % | ISO 527 | 5 | 4 | 4 | 3 |
Bending strength | MPa | ISO 178 | 160 | 175 | 190 | 210 |
Bending modulus | MPa | ISO 178 | 4600 | 5500 | 7800 | 9000 |
Charpy notched impact strength | KJ/m2 | ISO 179 | 8 | 12 | 16 | 18 |
Charpy impact strength | KJ/m2 | ISO 179 | 40 | 60 | 80 | 88 |
Thermal Properties |
|
|
|
|
|
|
Heat distortion temperature /1.8 MPa | ℃ | ISO 75-2 | 160 | 190 | 210 | 210 |
Heat distortion temperature /0.45 MPa |
|
| 200 | 200 | 210 | 215 |
Melting point | ℃ | ISO 3146 | 215 | 215 | 215 | 215 |
Combustion performance 3.2mm | class | UL94 | HB | HB | HB | HB |
Short-term maximum operating temperature | ℃ |
| 200 | 200 | 200 | 200 |
Electrical Properties |
|
|
|
|
|
|
Permittivity 1MHz |
| IEC 60250 | 3.5 | 3.6 | 3.6 | 3.7 |
Permittivity | KV/mm | IEC 60243 | 23 | 24 | 24 | 27 |
Surface resistivity | Ω | IEC 60093 | 1012 | 1012 | 1012 | 1013 |
Volume resistivity | Ω.m | IEC 60093 | 1013 | 1013 | 1012 | 1013 |
Tracking Index CTI |
| IEC 60112 | CTI 550 | CTI 550 | CTI 550 | CTI 550 |
Note: The above data is sample preparation material after drying for 24 hours at 23 ℃, 50% humidity measured.
product manual:
DriedDrying | Temperature | ℃ | 100-120 |
Time | H | 4-5 |
Molding Temperature | Nozzle | ℃ | 245±10 |
Second District | ℃ | 235±10 | |
Third District | ℃ | 230±10 | |
Four districts | ℃ | 210±10 | |
Mould Temp | ℃ | 70-90 | |
Pressure | Mpa | 70-95 | |
Molding Speed | % | 70-100 | |
Remark:
According to the injection molding method of injection molding conditions and mold die structure is different, to do the appropriate adjustments.
Advantage:
Low fiber content
Moderate rigidity
Good toughness products look good
Medium glass content, good mechanical properties and dimensional stability
High rigidity, good dimensional stability and heat resistance
High rigidity, high strength, excellent dimensional stability and wear resistance
