Home Companies Suzhou Bellaid lighting co.,ltd

Energy saving 80W 600 x 1200 Thin LED Flat Panel Lighting SMD2835 7500-8000Lm

Active Member

Contact Us

[China]

Contact name:wang

Suzhou Bellaid lighting co.,ltd

Energy saving 80W 600 x 1200 Thin LED Flat Panel Lighting SMD2835 7500-8000Lm

Country/Region	china

Product Details

only 13.5mm thickness 80W LED Flat Panel Lighting 60 x 120cm for hospital , hotel , office etc

Description:

Bellaid flat LED panel is a well-designed & easy to retrofit replacement for standard ceiling tile fittings( ceiling troffer fixture )widely used in offices,hospitals and other professional locales.
Our company LED panel has an outstanding luminous efficacy of 85lm/w achieved by utilizing ultra-bright SMD leds in tandem with Japanese-design reflective materials.
Thanks to its good sink design , Bellaid LED panel has unbelievable low in situation temperature 33℃,Calculated LM70 lifetime is 66,000h.

Product Specifications:

Construction & materials
Actual Dimension	5951195mm(23.4347 inch)
Housing	Extrusion aluminum and Diffused PMMA optical lens.
Finish color	White and silver
Lens type	Frosted
Retrofit	Yes

Environmental system
Work environment	Indoor use ( application for dry environment)
Operating temperature	-20～50℃
Mercury (mg)	0

Optical system
Luminous flux	3400lm @ 4000K,3600lm @ 6000K
Color temperature	4000K & 6000K is best seller.
CRI	82 for 4000K, 83 for 6000K
Spacing criteria	C0/180:1.26;C90/270:1.23
Lumen maintence at 6000h	95%
Lumen Maintenance Factor at Lifetime	0.75
Rated peak candelas(cd)	4000K @ 1300; 6000K @ 1450
Emergency Luminous Flux (lm)	1000LM @ 1/3 wattage

Electrical system
Input voltage/Current	90-277Vac;220-240Vac,50/60Hz
Off state power	0
Power consumption	36W
Power Factor	0.98
THD	＜15%
Protection	Class II driver, Class III panel IP20 real/IP40 front
Dimmable	No
Switching Cycles	50000
Start Time (s)	0.35
Warm-up time to 60% (s)	Instant full light

Features

Save up to 60% energy usage compared to traditional fluorescent fittings.
Optional built in, surface and suspension mounting kits available.
Class II
High Lumen output
Long life of 40,000h
Slim profile design
Instant start
Negligible UV output
Mercury free

Photometric Information

4000K 6000K

Distribution curve flux:

Illuminance demo:

User Guide Note:

Pls read the entire manual to fully understand and safe usely use this product.
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable for indoor dry environment.
Specifications are subject to change without notice.pls visit www.LED-Panel-lights.com for the most recent user guide versions.

Unpacking

Unpack and careful examine the product.
Report any damage and save all packing material if any parts were damaged during transportation
Do not attempt to use this apparatus if it is damaged.

Installation instructions

1) Pls remove the protection film on the front of luminaire

Consult a qualified electrician to ensure correct branch circuit conductor.
The products should be installed and operated by qualified electrician or technician in accordance
with relevant local codes.
Rish of electric shock,ensure that main power source is off when wiring or soldering the sections of
the product.

Maintenance

Prior to cleaning the product,make sure it has been disconnected from power supply.
Use a dry or slightly moistened cloth for cleaning
Never use any chemical or abrasive materials for cleaning.

Installation considerations

The product must be at a minimum distance of 20cm from any flammable material.
The product must not be installed into ceilings or wall that contain heat-insulating materials.

Installation steps

Built-in

Turn off main power before wring.
Remove the ceiling panel
Connect the input and ground wires(bare end) of the driver box to the main power outlet.
Connect male-female connector tightly on the panel and driver.
Fix the flat led panel into the ceiling.