Hangzhou Nante Machinery Co.,Ltd. |
|
SHA 10T-6m Low Headroom Electric Wire Rope Hoist Whl-D Type with Adjustable Gauge
Low Headroom Electric Wire Rope Hoist is the newly developed type
which is specific to the box type beam as well as I beam track,
which can greatly benefited from shock absorption and noise
reduction. What's more, the distance for the gauge can be adjusted.
Our series hoisting products have been exported to almost 50
countries and regions, including Europe, USA, Australia and
Southeast Asia, etc; And our products, by its newly unique design
and super quality, have gained a good reputation among users in
China and abroad.
1. Reducer
Third-class dead axel helica gear transmission structure is
adopted,; Gear and gear axel are made of heat treated alloy steel;
Case and case cover with precise assembly and good seal are made of
quality cast iron. The reducer is independent, so its easy to load
and unload it.
2. Control Box
It has device with up an down stroke protection of break off
limiter and can cut off main circuit in an emergency, which ensures
safe operation of electric block. Electric elements are of long
service life and operational safety.
3. Steel Wire Rope
It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in
use.
4. Conical Motor
The hoist motor uses conical motors of relatively stronger starting
torque to brake asynchronous motor and does not need extra
arrester. The motor s load duration factor is 25%; The motor uses B
frade and F grade insulation and its grade of protection
isIP44/IP54.
5. Button Switch
Its hand-operated, easy to handle, and has two modes of cord
operation and cordless remote control
6. Gear
By adopting Japanese technology, they are innovated symmetrical
arrayed high -speed synchronous gears, and are made from
international standard gear steel. Compared with common gears, they
are more wearable and steadier, and more laborsaving.
7. Chain
Adopts high strength chain and high precision welding technology,
meet ISO3077-1984 international standard; Fits for gusty overload
work conditions; Takes your hands a better feeling multi-angle
operation.
8. Hook
Made of high-class alloy steel, it has high strength and high
security; By using new design, weight will never escape.
9. Components
Main components are all made of high-class alloy steel, with high
precision and security.
10. Framework
Slight design and more beautiful; with less weight and smaller work
area.
11. Plastic Plating
By adopting advanced plastic plating technology inside and outside,
it looks like a new one after years of operation.
12. Encloser
Made of high-classed steel, more firmly and dexterous.
WHL-D1.6 | 1.6 | 8.0/1.2 | 15/5 | M5 | 2/1 | 2.5/0.37 | 100-400 | 420 | 320 | 590 | 570 | 0.0198H |
WHL-D3.2 | 3.2 | 4.0/0.6 | 15/5 | M5 | 4/1 | 2.5/0.37 | 100-400 | 420 | 320 | 436 | 500 | 0.0198H |
WHL-D2.5 | 2.5 | 8.0/1.2 | 15/5 | M5 | 2/1 | 4.9/0.8 | 100-450 | 500 | 400 | 600 | 720 | 0.0212H |
WHL-D5.0 | 5.0 | 4.0/0.6 | 15/5 | M5 | 4/1 | 4.9/0.8 | 100-450 | 500 | 400 | 600 | 650 | 0.0212H |
WHL-D6.3 | 6.3 | 10/1.6 | 15/5 | M4 | 2/1 | 12.5/2.0 | 100-500 | 570 | 500 | 700 | 950 | 0.0192H |
WHL-D12.5 | 12.5 | 5/0.8 | 15/5 | M4 | 4/1 | 12.5/2.0 | 100-500 | 570 | 500 | 700 | 800 | 0.0192H |
Drawing