|
[China]
Trade Verify
Address: 3A-8, No. 111, Taizi Road, Shuiwan Community, Zhaoshang Street, Nanshan District, Shenzhen, Guangdong, China
Contact name:Fiona Liang
TIANJIN ESTEL ELECTRONIC SCIENCE AND TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
IP55 Outdoor Electrical Enclosure weatherproof 1500W Air Conditioner
1. Description Of Outdoor Electrical Enclosure
The ET70100170-EQ used in outdoor environment.We carry IP55 enclosures that demonstrate almost complete protection from particles and a good level of protection against water,They are specifically designed for mounting onto a column. Double-walled case design safeguards the installed components from all-weather as well as from vandalism thanks to the cabinet's compact structure which prevents removal of individual components from the outside.
2. Selling points and Feature Of Outdoor Electrical Enclosure
- 19 inch device installation;
- Cable splicing and protection function;
- Welded forming with galvanized steel sheet, outdoor powder spouted at the inside and outside
surface;
- Heat-isolation material filled in the interior.
- The cabinet with IP55 protection level is dustproof, sunproof, and rainproof, especially suitable for the outdoor environment.
- The cabinet uses air conditioners as a cooling system, which can effectively reduce the temperature in the cabinet.
3. Technical Parameters
| Item | Type | Technical Parameter |
| Structure | Dimension | External Dimension (W×D×H): 700×1000×1700mm |
| Layout | 1 compartment | |
| Equipment Installation Method | 19″ Data Rack Rails | |
| Door | With one front door and one rear door, and special lock for outdoor cabinet (support padlock) | |
| Material | High quality galvanized steel, with double walls, thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm.The insulation material is 20mm PEF | |
| Structure | Welded | |
| Ingress Protection | IP55 | |
| Temperature Control | Cooling | Air Conditioner and Heat Exchanger Integrated Unit |
| Temperature | Temperature | Working Temperature: 40°C ~ +70°C |
| Storage Temperature: -40°C ~ + 70°C | ||
| Transport Temperature: -50°C ~ +70°C | ||
| Humidity | Relative Humidity | ≤95% (at + 40°C) |
| Pressure | Air Pressure | 62kPa ~ 102kPa |
Radiation Intensity | Solar Radiation Intensity | 1120 × (1±5%)W/m2 |
4. Accessories List
| No. | Item | Quantity | Unit | Specs |
| 1 | Outdoor Telecom Cabinet | 1 | Set | (1) External Dimension (W×D×H): 700×1000×1700mm (2) 1 compartment (3) With one front door and one rear door , and special lock for outdoor cabinet (support padlock) ; (4) Material: High quality galvanized steel, with double walls, thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm.The insulation material is 20mm PEF |
| 2 | Air Conditioner and Heat Exchanger Integrated Unit | 1 | Set | Cooling capacity: 1500W Heat Exchanger 80W/K |
| 3 | Environment Monitoring System | 1 | Set | LED 1pcs, Door detector 1pcs, Water Sensor 1pcs |
| 4 | Packing | 1 | Set | Wooden case |
5. Enclosure Cooling
1500W/Heat Air Conditioner and 80W/K Heat Exchanger Integrated Unit
6. Cabinet Structure
(1) External Dimension: 700×1000×1700mm
(2) 1 compartment
(3) With one front door and one rear door , and special lock for outdoor cabinet (support padlock) ;
(4) Material: High quality galvanized steel, with double walls, thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm.The insulation material is 20mm PEF
7. Cabinet Picture:
8. Cabinet Iock
Three point lock and key
9. Production
With the original design concept, a team of experienced designers has been built. After the introduction of PM product
creativity, industrial design, institutional design, electronic research and development, mold development, production and
assembly, the product to achieve the whole process from the wonderful creativity to the perfect realization.
FAQ
Q1: Are you a manufacturer?
A: Yes, we are a experienced manufacturer with our own design and
production lines.
Q2. Do you have any MOQ limit for outdoor cabinet ?
A: Low MOQ, 1pc for sample checking is available.
Q3: Can I get sample order?
A: Yes, we would like to get your sample order for testing our
quality, the sample cost is paid by the customer.
Q4: Are you able to customize items with design or logo?
A: Yes, OEM & ODM is available.
Q5: How do you ship the goods and how long it will take?
A: We normally make shipment by sea or air which usually takes
about 10- 50 days depend on the destination.
Q6: How long is the product warranty ?
A: We guarantee all our products 12 months warranty.
