TIANJIN ESTEL ELECTRONIC SCIENCE AND TECHNOLOGY CO., LTD |
Verified Suppliers
|
|
Galvanized Steel IP55 20U Outdoor Electrical Cabinet 720x720x1300mm
1. Outdoor Electrical Cabinet Description
Outdoor Telecom cabinets (with air-conditioner design) are ideal for applications where your expensive and sensitive network equipment is exposed environmental factors such as dust and water. This series cabinet is 1300mm High and 720mm Wide and 720mm Deep. It independently equipped with a standard 19-inch power environment monitoring module, remote real-time monitoring and monitoring and monitoring intervention sits on equipment in the base station, and remote maintenance and detection capabilities can be designed to significantly reduce late-stage operational maintenance costs.
Dimension:720×720×1300mm
The cabinet includes 19” mounting rack from top to down, without battery tray
The cabinet is made of galvanized steel, single wall, thickness: 1.5mm, without thermal insulation
4. Cabinet Parameters
Cabinet | Outdoor telecom cabinet |
Material | Galvanized sheet,single wall. |
Doors | 1 Front door |
Door lock | Anti-theft door lock |
Cable inlet | Cable entry holes are at the bottom of the cabinet |
Heat insulation | Optional |
installation | 19” rack |
Thickness | panel adopt 1.5mm |
Dimension | 1300H*720W*720D mm |
Cooling method | 220AC air conditioner cooling system |
Surface treatment | Painting,plasma electrostatic painting,hot galvanized,powder coating, polishing,brushing,etc. |
Mounting method | Floor mounting type |
Optional accessories | The door sensor, water sensor, smoke sensor, temperature and humidity sensor |
Security design | Embedded door, embedded hinges, 3-point security lock |
IP degree | IP55 |
Color | RAL7035 |
Package | Wooden case with pallets |
Working Temperature | -20~+55ºC |
Storage Temperature | -40~+65ºC |
(1) Applicable environment conditions:
Operating temperature: -40°C ~ + 55°C
Storage temperature: -50°C ~ + 70°C
Transport temperature: -50°C ~ + 70°C
Relative humidity (RH): 5%~99%
Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)
(2) Material: good quality galvanized steel
(3) Surface treatment: powder-coat paint, outdoor polyester light gray RAL 7035 coating
(4) Ingress protection: IP55
(5) Flame retardance: comply with GB5169.7 test A
(6) Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2×104M/500V(DC).
(7) Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.
6. Power system connections
AC input cable connections The connectors for AC input cable are two-core AC input sockets on the front panel of system. The AC cable can be directly inserted to the connector.
Connection of DC load cables The terminals for load connection of the system are LOAD1-, LOAD2-, totally 2PIN, locating on the front panel of the system. The cable can be directly inserted into the terminal.
7. Cabinet Picture
8. Cabinet inside Rack
9. Factory Introduction
Factory Size: 3000 Square Meters
No. of Main Production Lines: 5
Contract Manufacturing: OEM Service Offered, Design Service Offered, Buyer Label Offered
Production Experience: 10 Year