Active Member
|
[China]
Address: 3rd Floor, Building B, Sand yuan Po Industrial Zone 1970 Cultural, Minzhi, Shenzhen, China
Contact name:Rachel Liu
Shenzhen Skylynn Communication Co., Ltd. |
|
|
Fiber optic splice closure FOSC-5007H is a horizontal or inline
type closure, 4 inlets and 4 outlets. It belongs to the mechanical
pressure seal splice closure system, and it is widely used for the
terminations of communication fiber optic cables.
Fiber optic closure is a passive component which can provide a great protection for fiber
splicing point. Aerially assembling, pipeline assembling and buried
underground are all available. The Inline type closure is also called Horizontal closure.
The input and output are on the both sides. Inline closure is more
suitable for backbone application. Faso provides various shapes
closure of Inline type. All the closures we offered are with a
great sealing performance. High quality plastic material also
ensures the durability whether the closure is in air, in pipeline
or buried underground.
Easy to assemble
Aerial and wall-mounting.
Suitable for Φ5mm~Φ20mm cables
Aerial, underground, pipeline,man-holes,hand-holes assembling
The protection grade reaches IP 68
The closure is of small volume, big capacity and convenient maintenance.
The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment.
The splice trays (FOST) inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40 mm. Each optical cable and fiber can be operated individually.
Adapt to the ambient temperature from -40℃ to +65℃
Working temperature: –40℃ to +60 ℃
Atmospheric pressure: 70~106Kpa
Normal temperature sealing performance: 72h, internal air pressure 70Kpa, without decrease.
High temperature sealing performance: 60 ℃168h, internal air pressure 70Kpa, without decrease.
Tensile strength: 1000N
Compressive strength: 2000N/10cm2 within 1 min
Insulation resistance: more than 10MΩ between metal parts or between metal parts and the ground
Dielectric strength: 15KV DC, 2min, without spark over and flying arc
Working life: more than 20 years
Suitable for bunchy & ribbon fibers.
Aerial, underground, wall-mounting, hand hole-mounting, Pole-mounting and duct-mounting
| Item | Quantity | Usage | Remarks |
| Housing (bottom) | 1 set | Protecting fiber cable splices in whole | Internal diameter: 340*122 (mm) |
| Insert Plate | 1 set | Fixing the housing | 175*56*30 (mm) |
| Splice Tray (FOST) | Fixing heat shrink protective sleeve and holding fibers | Bunchy:12,24 (cores) | |
| Ribbon: 3 (pieces) | |||
| Foundation | 1 set | Fixing fiber cable, reinforced core and FOST | N/A |
| Seal Fitting | 8 sets | Sealing between FOSC cover and FOSC bottom | N/A |
| Port Plug | 4 pieces | Sealing empty ports | N/A |
| Pressure Testing Value | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| Earthing Deriving Device | 4 pieces | Deriving metallic parts of fiber cable in FOSC for earthing connection | Configuration as per requirement |
Outside Dimensions (L*W*H) | 450mm*220mm*110mm |
Weight (excluding outside box) | 2800g - 3300g |
Number of Inlet / Outlet Ports | 4 pieces on each side (total 8 pieces) |
Diameter of Fiber Cable | Φ8mm - Φ20mm |
Capacity of FOSC | Bunchy: 12 cores - 96 cores |
Ribbon: max. 144 cores |
