Shenzhen Skylynn Communication Co., Ltd. |
|
FTTH Round Cable Double Sheath for Outdoor/Indoor Use 4.6mm
Description
When entering a building, the outer sheath of the cable is simply
removed to expose the inner flame retardant Jacket. The operation
is swift and enables easy installation from an outdoor environment
to an indoor environment without the need of two different cables
and a cable joint.
The drop cable is primarily intended for direct installation, i.e.
installation with staples or clips or routing inside cable raceways
and mouldings. This installation technique puts extra tough
requirements on the cables in terms of bend performance, crush
resistance and other mechanical pa- rameters.
The LSZH Dual Jacket Cable is a fibre optic drop cable for
indoor/outdoor FTTx applications. The unique dual jacket design
enables the cable to be installed outdoors as well as short
sections indoors. The cable has dual Low Smoke flame retardant
sheaths, the outer is a UV-resistant black variant.
The drop cable has extremely good bend performance due to the G657
fibre and the inbuilt bend restriction of the cable design. The
cable will by itself control the minimum bend radius and permit
kinking.
Cable Characteristics
Small outer diameter,lightweight,flame-retardant,easy to strip,low attenuation,physically soft
Direct splicing between tight buffer cables and need no tie-in box or pigtail
Suitable for installation,operation,and convenient for maintenance
Applications
As building to building connecting cable
As indoor soft cable along the wall,ceiling,between layers and in conduits
As pigtails,movable connectors and patch cords for communication equipment
Cable Technical Parameters
Fiber Count | 1 | |
OD(mm) | 4.5±/0.2 | |
Cable | Material | UV - LSZH |
Thickness(mm) | 0.9±0.1 |
|
OD(mm) | 3.0±0.1 |
|
Inner cable | Material | LSZH |
Thickness(mm) | 0.5±0.05 |
|
OD(mm) | 0.85±0.05 |
|
Buffer | Material | LSZH |
Nominal weigh t(kg/km) | 24 |
|
Max.tensile Strength(N) | Long-term | 120 |
Short-term | 240 |
|
Min.Bending Radius(mm) | Static | 10D |
Dynamic | 20D |
|
Max.Crush Resistance(N/100mm) | Long-term | 300 |
Short-term | 1000 |
|
Strength Members | Aramid yarn |
|
Environmental Protection | RoHS COMPLIANT |
|
Storage ortransportation | -20~70℃ |
|
Operation | -20~60℃ |
|
Temperature range | Installation | -20~60℃ |
Optical Characteristics G657A2
Characteristics | Conditions | Specified Values | Units |
Geometrical characteristics |
|
|
|
Cladding diameter | 125.0±0.7 | µm |
|
Cladding non-circularity | ≤0.7 | % |
|
Coating diameter | 245±5 | µm |
|
Coating/cladding concentricity error | ≤12 | µm |
|
Coating non-circularity | ≤6.0 | % |
|
Core/cladding concentricity error | ≤0.5 | µm |
|
Curl | ≥4 | m |
|
Optical characteristics | |||
1310nm | ≤0.35 | dB/km |
|
1383nm | ≤0.35 | dB/km |
|
1550nm | ≤0.21 | dB/km |
|
Attenuation | 1625nm | ≤0.23 | dB/km |
Attenuation vs. Wavelength | 1525~1575nm | ≤0.02 | MHz*km |
1285~1330nm | ≤0.03 | MHz*km |
|
Zero dispersion wavelength | 1300~1324 | nm |
|
Zero dispersion slope | ≤0.092 | ps/(nm2*km) |
|
Polarization mode dispersion |
|
|
|
PMD maximum individual fibre | ≤0.1 | ps/km1/2 |
|
PMD design link value | ≤0.06 | ps/km1/2 |
|
Typical force | 0.04 | ps/km1/2 |
|
Cable cut off wavelength | ≤1260 | nm |
|
Mode field diameter | 1550nm | 9.3~10.3 | µm |
1310nm | 8.4~9.3 | µm |
|
Group index of refraction | 1550nm | 1.467 |
|
1310nm | 1.466 |
|
|
Environmental characteristics | 1310nm, 1550nm&1625nm | ||
Temperature cycling | -60℃ to +85℃ | ≤0.05 | dB/km |
Temperature-humidity cycling | -10℃ to +85℃, | ≤0.05 | dB/km |
Water immersion | 23℃, 30 days | ≤0.05 | dB/km |
Dry heat | 85℃, 30 days | ≤0.05 | dB/km |
Damp heat | 85℃, 85%RH, 30 days | ≤0.05 | dB/km |
Mechanical specification | |||
Proof test | ≥9.0 | N | |
≥1.0 | % | ||
≥100 | kpsi | ||
Macro bending induced loss |
|
|
|
1Turns @5mm Radius | 1550nm | ≤0.15 | dB |
1Turns @5mm Radius | 1625mm | ≤0.45 | dB |
1Turns @7.5mm Radius | 1550nm | ≤0.08 | dB |
1Turns @7.5mm Radius | 1625mm | ≤0.25 | dB |
1Turns @10mm Radius | 1550nm | ≤0.03 | dB |
1Turns @10mm Radius | 1625mm | ≤0.10 | dB |
Coating strip force | Typical average force | 1.5 | N |
Peak force | ≥1.3 ≤8.9 | N |
|
Dynamic stress corrosion susceptibility parameter | 27 |