|
[China]
Trade Verify
Address: 402, Building A, Xingguangbao Industrial Park, No.9, Lirong Road, Xinshi Community, Dalang Street, Longhua District, Shenzhen
Contact name:lee
Shenzhen Xmedia Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
P5 Outdoor Double Side Car Top Special LED Display Waterproof Led Sign For Advertising
♦ Led lamps type for your choice
(1) Use SMD3528 LED lamps, screen brightness over 4000nits, normal brightness & Good cost & hot selling
(2) Use SMD3535 LED lamps, high brightness over 5500nits
♦ Feature
1. High reliability. 24h/7day advertising all the time and all weather conditions.
2. Low power consumption.12V DC input. Vehicle battery is enough to make the taxi top LED sign work.
3. High brightness. Using P5 SMD LED display module, luminance reach 4300nit plus. Our taxi top LED sign can be seen very clearly in the sunlight.
4. High resolution. Compared to the traditional taxi roof screen, screen resolution of ours reaches to 192px64p.
5. It can play a variety of media resources such as text, photos, animation, video and so on.
6. The controlling and editing has never been as easy as now. Through 3G or 4G network, no matter where you are, as long as your device can access the Internet and open your browser, you can easily control the taxi top LED sign.
7. With GPS modules, the car can be tracked and located.
8. High quality acrylic cover keep the surface of the taxi top LED sign always clean.
♦ Product specification
| Lamp size | 2727 | |||||||||||||
| Resolution/mm | 5 | |||||||||||||
| Pixel configuration | RGB 3 in 1 | |||||||||||||
| Pixel density/pixels/m² | 40000/m² | |||||||||||||
| Module resolution | 32*32 | |||||||||||||
| Module size/mm | 160*160MM | |||||||||||||
| View distance | ≥4m | |||||||||||||
| Single point brightness adjust | Can be added | |||||||||||||
| Single point color adjust | Can be added | |||||||||||||
| White balance brightness | >8000cd/㎡ | |||||||||||||
| Color temperature | 6500K-9500K | |||||||||||||
| Horizontal view angle | 160(degrees) | |||||||||||||
| Vertical view angle | 160(degrees) | |||||||||||||
| Signal Process bit | 10 or 14 bit | |||||||||||||
| Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 | |||||||||||||
| Control distances | Internet cable:100m, multimembrane:500m, monofilm:5km | |||||||||||||
| Driving mode | Constant driving current | |||||||||||||
| Scanning mode | constant driving static | |||||||||||||
| Frame rate | 60Hz | |||||||||||||
| Refresh frequency | >3840Hz | |||||||||||||
| Control mode | Computer synchronous | |||||||||||||
| Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted 255 steps. No grey loss | |||||||||||||
| Out of control point | <1/10000 | |||||||||||||
| Working hours | ≥72hours | |||||||||||||
| Mean Time Between Failure | >10000hours | |||||||||||||
| Life time | 100000hours | |||||||||||||
| Life-all-white(brightness halving) | 50000hours | |||||||||||||
| Environment temperature range | Operating temperature range: -20-45℃ Storing temperature range: -30-65℃ | |||||||||||||
| Maximum power:/㎡ | <800W | |||||||||||||
| Average power:/㎡ | <300W | |||||||||||||
| Self-check technology | LED spot self-check, communications check, power check, temperature monitor(need customization) | |||||||||||||
| Remote monitoring | Remote supervision and control, record potential fault, send out warning signs to the operators.(need customization) | |||||||||||||
| Software environment | WindowsNT,Windows1999,WindowsXP | |||||||||||||
| Luminous point width between centres | Deviation<3% | |||||||||||||
| Brightness uniformity | <10% | |||||||||||||
| Color uniformity(chromaticity coordinate) | ±0.003 | |||||||||||||
| Power supply request | AC85-264V(50Hz-60Hz) | |||||||||||||
| Contrast | (1000:1) | |||||||||||||
| System protection | Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration | |||||||||||||
| Humidity(working) | working:10-95% | |||||||||||||
| Humidity(storing) | storing:10-95% | |||||||||||||
Taxi top LED display installation
♦ Production process:
1) Incoming Inspection→ 2) SMD→3) Plug-in
→4) Wave Soldering→ 5) After Welding→6) Testing
→7) Semi Finished Aging→8) Module Assembly
→9) Gluing→10) Finished Aging→11) Detection Finishing Warehousing
♦ Packaging and shipping
Wooden case or flight case package are available
Shipping by sea, air or DHL, multiple shipping ways for your choice.
♦ Why choose us:
Continues Quality
With more than 12 years experience in led display producing, equipments are updated regularly. What’s
more, unique standardized and module production ensure our products continuous quality.
Competitive Price
With large scale production capacity and professional production technology,our company have built
effective modular production. We always stick to promote the technical innovation and reduce cost to
benefit customers.
Fast Delivery
Once we promise the delivery date,we will try our best to fulfill it. Special procedures such as emergency
inventory will be used to maintain your uninterrupted supply of the products.
Perfect Service
Pre-sales: Your purchasing requirements will be highly valued and we’ll recommend suitable products to
you.
After-sales: We will track the products usage and then constantly perfect our products.
Buy guides:
In order to save you time avoid no necessary troubles, please
follow the steps bellowing :
1, Dimension ( Width and Height)
2, Location of installation. ( picture is best)
3, Purpose. ( what are you going to do with the LED Curtain)
4, Star effect or video effect which you need.
