Active Member
|
[China]
Address: 2nd.floor,A district,shuitian,4th industrial zone,shiyan,Shenzhen City, China.
Contact name:Simon
Shenzhen Always Bright Tech Limited |
|
|
Advertising LED Display P8Outdoor LED Full Color Module Screen
Advertising led display screen price p8 outdoor led screen Introduction:
1.
Energy-saving Design : Power consumption is lower than DIP outdoor products, each LED electric current is below 15mA, lifespan is longer, can reduce 25-50% of the power consumption effectively, low-carbon environmental protection, save electricity for customers .
2. Wide Viewing Angle : LED SMD encapsulation technology, makes surface more smooth, the outdoor full color LED Display can reach 140 degrees viewing angle both in the horizontal and the vertical direction, this has special advantages in some place, such as wall LED Display, requires a wide viewing angle to show better advertising effect.
3. Nice Color Blending : color uniformity is good, outdoor SMD 3-in-i design technology makes all the red, green, and blue chip in one structure, distance is close, so it ensures the coherence of brightness at optional angle is very good, achieve vivid viewing effect, at the same time, the mask is dealt with special processing, can ensure the coherence of product’s brightness further.
4. High Definition : High contrast, due to 3-IN-1 design structure, full-color SMD3535 lamp bead size is small, so the light emitting area is small, the black area is large, enhances the contrast of LED Screen, the 1/4 scan mode high refresh rate, the gray level > 16384, the refresh rate > 1200 Hz,makes the outdoor full-color LED Display is clear enough to replace the traditional DIP LED Display.
5. Good Heat Dissipation: using six Angle SMD3535 lamp bead, the heat of lamp and IC can be dispersed by PCB board more effectively, improve the heat dissipation performance of LED display module significantly.
6. High Automation Production Efficiency: SMD LED can be processed by automatic SMT mounter, improving production efficiency, reducing defective product rate.
7. Light Cabinet Weight : Outdoor SMD 3-IN-1 LED uses waterproof glue filling process, because of low lamp foot, don’t need too much glue to cover the lamp foot like the DIP, the surface is nice and not deformed easily, assembling is convenient and neat.
| Description | ||
| Unit module | Module size | 256*128mm |
| Pixel pitch | 8mm | |
| Pixel density | 15625dots/m2 | |
| Pixel configuration | 1R1G1B | |
| Led specification | SMD3535 | |
| Pixel resolution | W:32dots*H:16dots | |
| Cabinet | ||
| Total weight | 45kg | |
| Best viewing angle | 7-100m | |
| Temperature | Storage: -35°C~+85°C | |
| Working: -20°C~+60°C | ||
| Thickness | 15cm can adjustable | |
| Remarks: cabinet size can changed, upon project need. | ||
| Power | Working voltage | AC220V/110V±10% |
| Average power consumption | 600W | |
| Max. Power consumption | ≤1000W/sqm | |
| Current | ≤20mA(single LED) | |
| Control system | CPU | Pentium4 or above |
| Operating system | WIN98/2000/NT/XP | |
| Control method | Synchronization | |
| Main technical parameter | Driving device | 1/4 scanning |
| Drive type | Constant Current driver IC | |
| Refresh frequency | ≥1920Hz | |
| Grey scale/colors | 256 levels of each color(R/G/B)/16.7M color | |
| Brightness of white balance | More than 7500cd/sqm | |
| Brightness adjustment | 256 levels of each color(R/G/B)by software | |
| Operating ambient humidity | 10%--95% | |
| Video signal | PAL/NTSC | |
| Control system | DVI display card+full color controller card | |
| MTBF | ≥10,000hours | |
| Life span | ≥100,000hours | |
| Flatness | Tolerance of interpixel ≤0.3mm | |
| Tolerance of modules clearance≤0.6mm | ||
| Power switch | Automatic switch | |
| Communication distance | Unshielded twisted pair net line transmission distance 100m, max transmission distance 200m. Multi-mode Optic fiber transmission distance 500m;Single-mode optic fiber transmission distance 10KM | |
| Software | LED media player | |
