Home Companies TAIZHOU OSKAI MOULD limited

PP Material Aluminum Leg Stool Face Injection Mold

TAIZHOU OSKAI MOULD limited

PP Material Aluminum Leg Stool Face Injection Mold

Country/Region China

Product Details

You are here: Home > Product > Furniture Molds > Stool Mould

PP Material Aluminum Leg Stool Face Injection Mold

AddThis Sharing Buttons
Share to FacebookShare to TwitterShare to Google+Share to PinterestShare to LinkedInShare to ...

Aluminum Leg stool face mould

Mold Size

550x500mm / advice choose 250Ton injection machine

Mold cavity

single cavity

Mold Steel

718 forging steel, the original hardness is HRC30 degree

Mold steel treatment way

At final arranged hardness treatment for the core and cavity plates to HRC35 degree

Mold gate way

Hot runner

Mold uselife

400000 shots

Mold cycle time

55 sec

1st. Test mold time

55 days after confirmed mold drawing files

Mold doff way

Ejectors

Package

PET film covered then packing into standard wooden case

We made not only stool face mould, but also foldable stool mould, Big stool mould, baby stool mould, 2 steps stool mould we also good at that, pls contact with us for more information about stool mould.

Process

Mold steel

P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more

Mold cavity

1 or more (depend on client)

Surface treatments

electroplate (in order to prevent rust), thur. nitrogen (in order to rise surface hardness), vacuum quenching (in order to rise whole hardness)

Plastic materials

PP, PVC, PPR, ABS, PA, PC, POM, PS, PET, HDPE, LDPE and other

Software

UG, PRO-E, MOLDFLOW, CAD, CAE, VISI

Mold gate way

cold runner/hot runner/semi-hot runner

Mold base

HASCO, DME, LKM, HOME-MADE

Mold doff system

ejectors, off-plate, air valves, hydraulic jars, air jars, air ejectors, oil-motor and more

Mold cooling

Water cooling/air cooling/beryllium bronze cooling

Mold payment

50% down payment by T/T, 50% balance by T/T before shipment

Mold shipment

By sea/air/train

Mold packaging

packed into standard wooden cases

Mold quotation

most reasonable as rich experience

Technology

1) Mould structure design

Professional designers provide you with reasonably designed mould to shorten cycle hours.

Reducing unnecessary procedure improves efficiency.

2) Mould cooling system

According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.

3) Accessory for mould

Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.

4) Deal with mould

Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850

Service

1) We can repair the mould in one year for some free and provide technology. .

2) Gurantee period is 12months starting from the date of moulds accept in the Buyer’s factory.

3) If the moulds happen the bi

Hot Products

You are here: Home > Product > Bathroom Ware Molds > Oval Basin Mold 90L Rope Round Shape Basin ...
You are here: Home > Product > Bathroom Ware Molds > Baby Bath Mold 30L Rectangle Shape Baby Bath ...
You are here: Home > Product > Bathroom Ware Molds > Baby Bath Mold 25L Oval Shape Baby Tub ...
You are here: Home > Product > Furniture Molds > Stool Mould Plastic Material Baby Stool Injection ...
You are here: Home > Product > Furniture Molds > Stool Mould PP Material Aluminum Leg Stool Face ...
You are here: Home > Product > Furniture Molds > Table Mould Combinatorial Table Face and Leg ...