|
[China]
Trade Verify
Address: NO.9, Hongfeng 1st Street, Nanshe Village, Chashan Town. Dongguan City, 523391, China
Contact name:Aaron
Dongguan Ruichen Sealing Co., Ltd. |
|
Verified Suppliers
|
|
|
PU 90 O Ring Rubber For Paintball Gun Carbon Dioxide Resistance Air Tightness
Sealing Applications
Static Sealing � in which there is little or no relative motion
between the mating surfaces: and Dynamic Sealing � which must
function between surfaces with definite relative motion, such as
seal on the piston or hydraulic cylinder. Of the two types, dynamic
sealing is the more difficult and requires more critical design
work and materials selection. O-ring selection is based on chemical
compatibility, application temperature, sealing pressure,
lubrication requirements, quality, quantity and cost.
Standard O-rings are made from a variety of rubber compounds and compression molded into the shape of an O-Ring. Base polymers include polyacrylate (ACM), ethylene acrylate (AEM), butyl rubber (Isoprene, IIR), polychloroprene rubber (Neoprene), ethylene propylene rubber (EPM, EPDM), fluorosilicone, acrylonitriles-butadiene (Nitrile, NBR), hydrogenated nitrile (HNBR), polyurethane (AU), silicone, fluorocarbon (FKM, FKM), tetrafluoroethylene propylene (Aflas), high performance fluoroelastomers (Hifluor), and perfluorinated elastomer (Parofluor and Parofluor ULTRA).
Industry standard O-Ring sizes in accordance with AS 568 dimensions are available or custom O-Rings of practically any dimension can be made to fit an application. Miniature o-rings, large special o-rings, continuously molded and spliced cord are just a few examples of the custom o-ring possibilities.
Competitive Advantage:
1) have all AS568 ,Metric and well used series o ring mould,and parts of other standards
2) work with buyers worldwide more than 10 years in rubber solution.
3) high quality with best price
4) All material can pass FDA test and also have FDA certification
5) OEM parts mold cost can be return back once your Quantity can reach our requirements.
6) a very special manufacture in industry for rubber and silicone products
PU 70 TEST REPORT ASTM D2000 M2BG 714 B14 EO14 EF11 EF21 EA14 F17 | |||
PROPERITIES | SPECIFICATION | TEST RESULT | TEST METHOD |
Hardness shore A | 70±5 | 66 | D2240 |
Tensile MPA Min | 8 | 8.86 | D412 |
Elongation % Min | 100 | 116.2 | D412 |
Gravity |
| 1.31 | D297 |
Heat resistant 70h 100℃ Hardness change |
|
| D573 |
Tensile strength% | ±30 | ﹢15 |
|
Elongation Max | -50 | -12 |
|
Compression Max 22h at 100℃ | 60% | 53.2% | D395 |
NO1 oil resistant |
|
|
|
Change in hardness | -10~+5 | +1 | D471 |
Change in tensile Max | -25 | -16 |
|
Change in Elongation | -45 | -20 |
|
Change in Volume% | 0~25 | +6 |
|
Fuel resistant 70 H at 23℃ |
|
|
|
Hardness change | ±10 | +3 | D471 |
Tensile change Max | -25 | -8 |
|
Elongation change Max | -25 | -10 |
|
Change in Volume | -5~+10 | +3 |
|
Water Resistant |
|
| D417 |
Change in Hardness |
| +3 |
|
Change in tensile |
| +5 |
|
Change in Elongation |
| -14 |
|
Change in Volume | ±15 | +3 |
|
Low Temperature resistant |
|
| D2137 |
3 MIN -40℃ | Non brittle | Pass | D2137 |
Products Show:
Name: PU O Ring Color: Semi-transparent Hardness: 90 +/- 5 shore A
